numbers

So I used NaughtyG's excellent picture rich post as a guide, and over 3days cleaned all 4. Here are the numbers, 24 frame/bracket screws, 16 slide diaphragm cover screws, 16 float bowl cover screws, 12 coasting enrichment screws, 12 choke cylinder screws, 8 jet block screws, 4 choke fork screws...

Anyone around here happen to have a resource on hand that shows how many V-Maxs (V-Maxes? V-Maxii?) were produced per year? I'm specifically interested in the '85, but have been unable to find anything. Thanks

I am going to pull the trigger SOON and re-enter the ownership experience with a Gen 1 max and needed some help. When I had my 1985 originally I outfitted it with the Yamaha OEM accessory Flyscreen and Case guards. I have made efforts to find these accessories (sissy bar, Flyscreen and...

hello there i have a 98 max with frame number 2WE070397 the plate is missing with the rest on which would be JYA????? , just thought if someone had one close i might be able to fill in the gaps,it looks like an import from the usa ,many thanks john

This is a cool site dedicated to a nearly-forgotten sub-genre of the vintage hot rod/sports car. After WW II people took advantage of the use of fiberglass to create many different cars, using chassis they scavenged from wrecking yards, for the most part. In the back of Hot Rod, Road & Track...

Hi all I've been tinkering with FCR setups for a while and I would like to know what jets are the FCR users using on their carbs. I know it depends on pressure altitude and all that but I would like to have an idea of a starting point to work with. The FCRs have 4 jets, 2 air jets (main and...

Me Likey! :biglaugh:

Whattup all! So, Im thinking about putting one of the hyperchargers on my 2009 1100 vstar classic. Does anyone know what the actual HP boost would be? I hear alot of people talking about the noticeable difference, but Im not hearing any numbers. Any info is super appreciated! Thanks brothers! ~Gary

OK, know this has featured before, so apologies, but an associated query. Acquired a rear wheel with an hardly worn tyre at a very good price. However, knowing the wheel had stood for some time, decided attention beyond cleaning made sense. Replacing wheel bearings and seals seems sensible...

Mine says TID14-93 B , 3JP-11. I found one that says TID14-93 C , 3JP-12. Will they interchange?

OK I know I seen theses somewhere but I can not find the link. What are the aftermarket part numbers for oil,fuel filters. Nappa, fram, etc? Sorry for starting a new thread on the subject I will have to add the info to my favs page. Thanks guys Also what are the best spark plugs to run?

I was attempting to order some new Yamaha OEM fork seals and bushings for my '94 from K&N. On the parts fiche, there is no part number for one of the bushing sliders. The fiche only shows one slider and not the other. Not sure which one is shown and which one is missing, but I wanted to order...

Hy, is there a magic of number for you guys:ummm: as when your Max reach 50,000 miles or 25,000 miles well, in 500Km my Max will reach it`s birthday cake of 100,00Km:th_party33: :scooter 1:100,000 km = 62,137.11922 miles I asume the rear tire will have to pay for that:biglaugh: :punk:

what are these numbers telling me?

can anyone tell what the numbers on the throttle plates represent ? TIA

Hi guys, I've been reading a lot about the potential low oil pressure associated with that 'o' ring pushing out the siphon in the fuel pump. I've heard two stories on this: The first is that this is a result of not letting the bike warm up enought before riding it hard The other thing I...

:worthy:http://www.cycleworld.com/2011/12/29/2012-kawasaki-zx-14r-feature/:worthy:

Replaced 2nd gear with a used ebay part and now 2nd gear is there but slipping. I did not have second gear at all before changing it. 2nd gear is slipping under load (4-5k). I want to change it with new parts but I will need the part numbers. I cannot afford to undercut the gears. After...

Noticed these couple numbers etched into the engine case near the motor #... underneath the #2 cylinder headpipe. Definitely looks done by hand instead of the machined stencil of the motor #. There's two small raised boxes that would seem to be for these two two-digit numbers. Mine say 95 and...

Finally finished my " Mad Max" project. Factory exhaust modified with 3/4"holes smoothed out with Unibit to nearly 13/16" Stock box with K/N. Before tune 105hp/79.39tq. after 115.10hp/79.47tq. The A/F screws 2.5 turns. Stage 1 needles,springs, shims, Air Jet DJ 150 and the main 147.5. Sync -...