setup

Have Mark's 4-2 headers installed with LOR mufflers and just installed Morley's jet kit. Elevation - 463 ft Current settings; 157.5 mains 100 PAJ1 177.5 PAJ2 Factory Pro Ti needles with clip at 2nd position from blunt end. V-Boost is functional. Stock springs. Slides are not drilled. Floats...

Hi all: Anyone out there recommend a place I can buy the mods necessary to update my old-school ('89) oil filter setup to the new, one-piece filters? I know I've seen someone who sells the modded crossbars, but I can't recall... Thanks. Elimax

Ok looks like im going to take the plunge into a 1500 mtr, now how to feed the Beast, Do i stick with my Morley Kit or go with the flatsides, (With Uni Filters) $$ to hp and torque are the flats going to make that much of a difference? JIM:bang head:HOW TO DECIDE!!

I was able to pickup a plug'n'play 55W HID conversion setup fairly cheap after dropping a rather nice coupon at the local dealership. However, with all the talk, I am concerned whether the stock wiring harness will play nicely. With them both being 55W, should I have any issues if I install it...

Post pics here of your aftermarket/custom gauge clusters and setups. Be interesting to see the variations out there and give folks ideas of what can be done. I will post pics tonight or tomorrow of Toxic's custom setup from Cycle One Off.

Is anyone running a dyna 3000, nology hotwires, and NGK DP8EA-9 plugs? How does this work? Any problems? The bike has VGAS, and 4 into 2 pipes thanks

Hi all: I'm looking to go with a USD front fork setup (new or used) for my '89 Max. Any of you have any suggestions for the least expensive setup to do this? I'd like to keep the stock front fender, stock front wheel, axle, bearings and speedometer if possible, while (of course) replacing...

stealthy NOS setup

I have a Harlan shift light on the way and have a quick question. I've got the installation and mounting figured out, but have a question about the actual programing of the light. I know I need to set it to 2 cylinder due to the firing order....in doing that, do I need to cut the RPM turn on...

Im almost all done a modified set up using the swing arm from FATMAX...and wanted to see who has used one already to ask a few questions....

This is what I have been working on and it is just about finished i just need to paint and finish all of the wiring. Wada you guys think?

with a strange jetting. It has the nr.1 needles from this thread http://www.vmaxforum.net/showthread.php?t=3208 main jet: 147,5 and the jet behind the diphragm is a 170. Is this a stage 1 or what???

http://cgi.ebay.com/ebaymotors/Yamaha-V-Max-2002-Yamaha-VMAX-1200_W0QQcmdZViewItemQQ_trkparmsZ39Q3a1Q7c66Q3a2Q7c65Q3a10Q7c240Q3a1318QQ_trksidZp3286Q2ec0Q2em14QQhashZitem200262104745QQitemZ200262104745#ebayphotohosting This is a nice setup. Won't work when the wife is on the back, but the tank...

What would this entail for all of the jets and needles to come up with a stage seven only mikuni style any help would be great.

Hello, I have a '98 Vmax, looking into lowering it a bit front and rear, both to get it closer to the ground and so my feet can reach the ground better :whistlin:I'm not into racing, but I would like to get a good "street" upgrade for reasonable $ spent. What is the best buy so to speak, if I...

getting ready to install ANOTHER newer r1 front end on the bike using the otec triples this time. the current setup is an 03 r1 with cycleoneoff triples-inside the forks are what was there when i got the setup. i'm switching to an 05 r1 radial mount setup and want to know if i should be...

I bought this 1992 used. It has progressive 412s in the back. And someone has been in the forks, because I'm sure the PVC didn't come from the factory... But, It's either stock springs with a "longer/shorter" spacer? Or progressive springs with a longer/shorter spacer. The spring does look...

O/k guys i'm a newbie so i hope i'm posting in the right area here. Some of you may have seen my thread under Vmax Trike as i'm posting weekly pics of my build. I want to ask a question here. i've seen builds where Hardleys, Honda Goldwings & BMW can install a reverse gear for their trike...

Somebody emailed me a few days ago asking where to get everything needed to convert from Euro model. Here you go! http://cgi.ebay.com/ebaymotors/yamaha-v-max-vmax-oem-v-boost-assembly_W0QQcmdZViewItemQQcategoryZ35597QQihZ003QQitemZ130176228061QQrdZ1QQsspagenameZWDVW Mark #1098