sync

I have been syncing my carbs but i cant get cylinder number 1 front left to match up with the other cylinders any advise would be great ?

Does anyone live near Daytona beach that has a sync tool I can use? Thank you

I stripped one of my sync screws out! Pulled out my spare parts carbs and they have been modified due to the same problem. The 1st pic is my stripped screw hole the 2nd is my parts carbs. Does anyone have any suggestions on how I can fix this? I have some ideas but I'm looking for some more...

I've been looking around the forums for about an hour, because I know my question has been asked before. I'm sure I'm just not using the right search terms.. so sorry for the repeat :) I am syncing my carbs for the first time. I am using the weber sync tool that sits on top of the carb...

anyone ever use an emgo carb sync or any one with guages? i bought one cause it was only $64 and after i used it the bike idled rough and had a bit of a stumble. i had the valves barely open to reduce the flutter on the needles and they all read the same. it just didnt run right. so i borrowed a...

Does anybody else have problems with Tapatalk forgetting (or not syncing) which posts have been read? I read them in Tapatalk, but on refreshing the forum in the app the same threads are unread again with exactly the same posts being unread. The website never sees that I have read anything in...

I have a stage 7. I've always synced the carbs with vboost off. Can you sync them with vboost on?:ummm: Thanks my VMAX brothers.

A friend of mine who actually exposed me to the Vmax (very grateful), has a stage 7 kit on his. Now I know when I sync my bike, I sync 1 to 2, 3 to 4, and then side to side. My friend with the stage 7 kit is under the impression that the only sync that he can do is from side to side. He believes...

Just curious. In your opinion, how often do you check your carb sync?

Senior moment, see second post.

What would happen if you tried to sync carbs on a bike that was running on 3 cylinders as opposed to all 4? Like if you had a bad spark plug wire or something and one cylinder wasn't firing? Would the sync still be valid? Having a discussion about this on the V4 forum and I was told it...

I have just thoroughly cleaned the carbs adjusted floats, replaced the A/F screws, all the rubber jet plate plugs and intake boots. The bike runs like it never has before at WOT. However I cannot get the sync correct, I can sync the right side and the left side but not get them to sync together...

Hey everyone, Im quite confused about a carb sync problem I've been having with my 94 v-max. I run my bike for about 5 mins then sink up carb number 1 with carb number 2 and all seems okay. However, when I try to sync carb number 3 with 4, the engine starts to drop from 1000 rpm and dies before...

Looking for a really good tutorial on how to sync the carbs. Has anyone made a video on the subject for the Vmax?

Any recommended sync tool links here, I need one, Thanks.

Hey Guys, Now that I have the baffle squared away (thanks again donnelly317) im working out the other little kinks on this bad boy. First thing on the list is to make sure the carbs are synced. Does anyone have a carbtune in ct i could meet up with or maybe borrow for some beers? :-) I...

Hey guys Synced my carbs today. Best way to do it is use 4 gauges. I went to harbor freight and bought 4 vacuum gauge's for 40 bucks. Just pinch the lines until it take out the fluctuations. The best way to do this is set your idle to 1200 RPM. Adjust the right side front carb to match the...

Hey guys I got very frustrated using a single vacuum gauge adjusting my carbs. I bought a real set of gauges. What I found is the left side carbs fluctuate around 15 inches of vac. The right side are about 10. I'm adjusting them at the screws that then throttle rods are connected to is...

Hey guys My max runs fine. Plenty of power. The one thing i notice is the bike does not sounds right. No missfires at all. I checked the exhaust temps at the headers. Found the back two at operating temp are 200 degrees. The front two are cooler. The left front is 130 degress and the right front...

Don't want to spend $100.00 on one, read you can build one for $15.00. Searched the forum and came up empty on how to do it. Can someone tell us how to build one?