sync

I just bought my 97' VMAX, and the vboost was removed. I just rebuilt the carbs and now I am having trouble synchronizing the carbs. Is there any special way to sync the carbs with the vboost removed? If it is easier to sync with vboost, what are the minimum vboost components I need to install...

I have removed the v boost along with doing a complete stage 7 mod several years ago. The bike now needs a good carb cleaning. I've tried the shotgun and pea shooter, but have problems off idle - the bike runs fine at idle with choke - dies when giving it throttle. Done the Seafoam trick -...

Ok - what is the proper rpm to sync you carbs at - i have heard from 800 -- 2000 rpms - what is it?

Anyone in southern Ontario have 5mm carb fittings for syncing the carbs that I can borrow for this weekend? This is the standard size for Suzuki and Honda. Thanks!

I am going to use my Morgan Carbtune Pro for the first time. I read that I should set up the tool first on a cold engine, then choke and warm up the bike a bit then start the process after no choke is needed. Would it be ok to go for a ride around the block to warm it up a little before I...

So a friend of mine just picked up a VMax, and should be putting up pix of it this week, but anyway. The previous owner didn't seem to be all that handy after looking the bike over. After fixing a few things, like getting the l/h side carbs all the way back into the boots haha and the 265 mile...

First, remove the plastic "H" manifold covers. Use the correct size of Phillips screw driver. If you have trouble, carefully use a pliers. Do NOT use an impact driver or you may crack the manifold. This is the left side. The left manifold is the only one with a hose. Move clamp up the hose...

From reading all you guys GREAT info I determined I have to learn how to sync my carbs.Is there a skicky or a site (with pictures if possible) that I could go to. FRED

After 10 years, my Motion Pro mercury carb sync bit the dust. I left it outside over the winter and the four plastic tubes cracked badly. So I need to get a new one and before I do, I thought I would ask which one is the best - mecury/tube style or other rod style, individual vaccum gauge...

Ok..some more dumbass questions... Got a new MotionPro (merc) sync tool...and need to know if there's a need to keep the thing ABOVE or BELOW the carbs when in use. Or is there any difference in doing either way?... The plastic line(s) sent, are not really long enough to reach to the...

I purchased a Motion Pro non-murcury model today to sync my carbs. I followed the instructions that came with it carefully. The first step is to syncroize the tool with the non-adjustable carb first, then adjust the others based on that. The only problem is, when I turn the bike on the fluid...

thinking about how we have to sync our bikes up so much. would loctite help us keep dialed in or is it more a valve issue?

Just wanted to share my experience with this item. Got it, and could not get 2 of the tubes to work right. it's obviously a problem with the restrictors, but they just didnt give the proper suction. you also have to synchronize the tubes prior to operating the tool, and the fluid leves in...

Hey folks, I finally found some places on the web that still carry the economy/deluxe models with the mercury, but nobody will ship one to me. Does anyone have any good ideas on this issue? The economy one can be had for under $45 at most places I found. Maybe someone reading this post could get...

Went on a long ride, only to discover that the bike will get hotter the faster I ride it. If I ride steady any length of time at 4000 rpm or above the bike will eventually get to go into the red zone. Anybody have or had this problem ? My rad is fine, and the I run a whole bottle of water...

Gonna try and sync my carbs on the weekend using a motion pro kit. First time I have ever done this, so to those of you ( Shawn Kloker) who have is there anything I should know/look for? Thanks Jarrett