dekberg
Well-Known Member
Got my carb sync tool in a couple days ago and went out tonight to sync the carbs. Got a carb sync tool with 4 gauges. Hooked everything up and after warmup and at 1000 rpm idle the gauges are reading at about 7 psi at idle. All gauges are reading this low. Normal is supposed to be at 22 psi (I think). Is this an issue? The bike idles good and I don't seem to have a loss in HP. All gauges are reading the same but that # seems low.:ummm:
**UPDATE: My gauges read in vacuum inches. The guages are reading in a red area that says the following: (late valve timing or leak at intake manifold or heat riser).
My VMAX has 20,000 miles on it and has never had a valve adjustment and the rubber boots around the carbs and manifold are dry and cracked. Could/would these two things be the possible culprit?
Please help!!!!
Thanks,
Darren
**UPDATE: My gauges read in vacuum inches. The guages are reading in a red area that says the following: (late valve timing or leak at intake manifold or heat riser).
My VMAX has 20,000 miles on it and has never had a valve adjustment and the rubber boots around the carbs and manifold are dry and cracked. Could/would these two things be the possible culprit?
Please help!!!!
Thanks,
Darren
Attachments
Last edited: