satariel666
Well-Known Member
No rush but promise to keep us posted
Just wanted to let you know I had an intermittent connection in my pick up coil harness. There was a crimp connection that had a break about 2" away from the grommet where it goes through the metal harness retainer behind the middle drive cover. You cant see it unless you pull back the outer plastic jacket. You may want to measure the coil resistance as you flex the harness to see if the reading changes.
Before pulling off the stator..did you check your ignition unit (TCI) with a known good one? I have the exact same problem.. no spark ..same symptoms as yours. Starter motor turns good but will not produce spark..I will check the TCI before I check the pick up coil. But I have to wait to have get my bike back. I have the older pick ups though. I stupidly tried to ride through a heavy rain storm and the bike died.
Oh, Dynas likes to go bad - I have one bad already...I have a Dyna 3000 not the orig unit but i may have to go back to orig
Enter your email address to join: