Recent content by rogvmax

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. R

    Miss when cold runs well when hot?

    I have a problem with the spark wire on my left side back cylinder. Put Your finger on top of the spark plugg cap and at the same time nearly touching the top cover. You can feel It. Thats how i found out. Or use a screwdriver. And You can se the spark jumping on to the cover. Maybe You have a...
  2. R

    Failed idle mixture screw?

    I did check out the cover. I did not find any cracks in It. I changed It with an other cover on the bike anyway. I then noticed that there where a slightly responce when i did some adjustment on the a/f screw. Now i have ride the bike for 3000 miles and It seems That all the a/f screws are...
  3. R

    Failed idle mixture screw?

    I will check that out. Thank you for the tips.
  4. R

    Failed idle mixture screw?

    Sorry for my late update. I have done some shotgun but I do not have any air compressor right now. I have lent it out to a friend. I had to use a can of compressed air and that dos not give much pressure.Did not fix the problem. I will try again when the air compressor is in my garage again...
  5. R

    Failed idle mixture screw?

    Thank you sdt354. I have bought the carbtune pro and synced the carbs. Idle is very god right now but the idle mixture screw is still not working. Also did a simple carb rinse thru aj1 and aj2. Did not help. Next step will be pulling the carbs and a total cleaning. Maybe in an ultrasonic bath...
  6. R

    Failed idle mixture screw?

    Hello. I am new at this forum and I am from Norway driving a 2002 Vmax PC. I have a small problems and I can´t get any further adjusting the carbs before problem is solved. 3 of the idle mixture screws seem to function as designed. As I turn them in one at a time the idle get bad. So I turn...
Back
Top