Search results

I replaced the hoses and checked the Plugs. Turns out my little "helper" dropped a plug and reset the gap for me after I had them all set. Once it was reset it was all good. It seems to run a little rich on the low end, but the left rear cylinder is running lean. Not sure what to do about this...

Yes, I replaced the rubber plugs and cleaned the internal jetblock parts in an aircraft grade ultrasonic cleaner. Everything was in bad shape. All the small jets were clogged and the center jets were in pretty rough shape. The caps had disintegrated and cause the biggest issue. Some genius had...

I'm going to check the plugs tonight and see what's going on there. I'd REALLY hate to take those carbs off again.

Rebuild is done with OEM parts, fuel levels set per instructions here and I received a great instructional video form a member (Thanks!). She's running great off idle, but spitting and backfiring upon decel and idle. I'm looking for a vacuum leak but to no avail. I'm missing the 4 vent hoses...

Thanks all! Will pull them back off and fully disassemble.

Hi everyone, new member here. I've spent the last few hours perusing the carb section looking for the answer to my questions, but to no avail. I'm pretty good with carbs after many years of jetting and tuning race bikes from the mid 90's on. This bike has me stumped! I've bought a 94 Vmax that...