4 - 2 Holeshots needle shims

[dannymax]

What does Walker typically recommend for shimming with his 4 - 2 holeshot system?

 

[dannymax]

Nobody out there has Holeshots with shimmed needles? :ummm:

 

[gamorg02]

dan, chris may know. he had a stage 1 walker kit on it which is probably closer to stock needles. my stage 7s were 2.5 clips from blunt end i believe, but that probably doesn't help. i'd probably start where marks recommends since they're both 4-2s. closest comparison there is for a general recommendation?

 

[dannymax]

dan, chris may know. he had a stage 1 walker kit on it which is probably closer to stock needles. my stage 7s were 2.5 clips from blunt end i believe, but that probably doesn't help. i'd probably start where marks recommends since they're both 4-2s. closest comparison there is for a general recommendation?

Thanks Garrett...that's what I was thinking too....go with what Mark suggested, or in the neighborhood.

 

[2stangs69-91]

he recommends 1 shim with his stage 1 kit.

 

[naughtyG]

my stage 7s were 2.5 clips from blunt end i believe, but that probably doesn't help.

I'm confused - are there 'half-clips' on the stage VII needles? :ummm:

 

[ninjaneer]

No. you take one of the washers from the "normal" position and put it on one side of the clip right next to it. ask for more details if that doesn't make sense

Sent from my Tapatalking Hercules Android

 

[gamorg02]

I'm confused - are there 'half-clips' on the stage VII needles? :ummm:

nope, use a shim just the same as the others that are 1/2 the size of a clip distance.

 

[dannymax]

he recommends 1 shim with his stage 1 kit.

Thanks 2stangs. unk: