shop deals on amazon
Advertise with us
Shop deals on ebay
VMAX Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
There's Allen's Paints here in Denver, they matched the paint and put it in two rattle cans and a quart for later plus a can of Bulldog prep. about 75
That's the fake tank, it surprised me that its metal, it had a nasty gouge that I filled with rod, no need for bondo.
The faux tank is steel, but the fenders are both plastic. I'm not a body man so the first place I touched on the front fender is about an 8th inch thi
After these pics , I was advised to fine sand again with a block and 280 up to about a 400 grit. I should have taken some pics then, because it sure s
There's Allen's Paints here in Denver, they matched the paint and put it in two rattle cans and a quart for later plus a can of Bulldog prep. about 75
Following specific but easy prep instructions, I went for it.
That's a lot of fender, I had forgotten about the paint! I screwed up and threw away the paint and other chemicals when I painted the first parts.....
When I saw the forward controls on ebay I knew what mods were to be made right out of the box. I have found that being able or willing to mod some par
gentsvmax

There's Allen's Paints here in Denver, they matched the paint and put it in two rattle cans and a quart for later plus a can of Bulldog prep. about 75

There are no comments to display.

Media information

Album
Basket case rebuild
Added by
gentsvmax
Date added
View count
381
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
8696-1386303429-ce6130dd4eb817d5341e29bad36309f7.jpg
File size
26.7 KB
Dimensions
600px x 360px

Share this media

Back
Top