Fire-medic's latest activity

You might want to do some poking w/an awl or other somewhat pointed object where you suspect the leakage is. You may find the weak spot...

Like anything electronic, an Ignitech can sometimes crap the bed. That seems to be a rare occurrence. Having capacity to work as a...

Welcome to the group.

That is a 'below-market' price! A good find. Even one needing painting/powdercoating I'd expect to be more than that. Snap a few pics of...

https://dn790009.ca.archive.org/0/items/printermanual-yamaha-vmax-vmx12-service-manual/yamahavmaxvmx12-service-manual.pdf The first 64...

Hello Jay, welcome, and thank-you for being a Supporting Member. Some resources for you...

https://starriderperformance.com/twinstar-4-2-slip-on-exhaust-system-ceramic-coated-black-09-20-all/ See all he has here. Mike Lees...

I've paid similar, and have gotten some even cheaper. If it doesn't have a title, I'm not interested.

The leakage is most-likely from the threads, so MM's idea of teflon tape on the threads should do it, a couple wraps should do it...

Using the library of prior posts to search the threads can be very helpful. May I make a suggestion, consider making a donation to be...

A suggestion, remove the bracket holding the VBoost open, and do the 'unplug the VBoost connector as it cycles full-open upon turning on...

"Get on your bad motor scooter and ride!" I once rode my mountain bike across the Golden Gate Bridge to Sausalito where Sammy Hagar...

If you read the sync instructions, you'll see that you need the carburetors to be able to have only one pulling the partial vacuum...

Well, that's a new one! Something to check. Might be a good idea to buy a spare fuel sender unit while they are still available. You...

Welcome, some reading for you...