So i have made the home made sync tool and sucsessfully set the carb sync pretty close . Now my question is how do Correctly set the A/F screw settings? is it simply by ear or for best RPM? they are preset at 2.5 turns out just at a starting point right now. bike runs pretty good but im guessing...
i guess in florida since we dont have curvy roads we dont see the need for all the frame bracing and radial tires and all the other mods for handeling i read about. and for that matter most people here must be supeiror riders because my stock vmax seems to handle great and have more capability...
ok so heres the update. bike still ran bad, i went ahead and cleaned the air pilot jets again on the suspect cylinder and all is good once again. when rebuilt the carbs the first time i found what i thought was rust in the bowls, i would guess that the new fuel filter would catch this if it...
i replaced that plug in the right front cylinder, it was wet with fuel. ran the engine and still the cylinder runs cooler than the rest. i havent rode it yet but im pretty sure it still going to have the problem.:bang head:
is it possible i got some crap back in the pilot air jets already ? i...
so heres my issue. i recently rebuilt carbs , changed plugs and oil. cyncd carbs with a home made monometer. took the bike out and rode great for about 50 miles or so then i ran it hard and got the vboost opened up a few times and then noticed a popping from the right side exhaust but only under...