kvb34441

Yeah I spent the better part of yesterday going back and forth between the wiring diagram and the bike checking every connection in the...

I believe it was off of a ‘92. However it had been sitting for quite a while.

If you’re referring to the cdi box wiring then yes. Seemingly no shorts or breaks in that whole harness.

Back again. Been out of town for work for the past 3 weeks so I’ve just been able to start tinkering with it again. Still stumped. I...

Just for gits and shiggles I decided to check the pickup coil’s ohms, I’m reading right at 100. Is this within spec?

Sorry for the delay. I got the replacement sub harness in for the left hand control switches. Plugged them in, still nothing. Also a...

Sounds good. I’ll get to it tomorrow and let you know how it goes. Thanks much!!

Just a wild theory, I don’t currently have the left side controls, (turn signals, horn, etc) could that possibly have anything to do...

That’s the relay on the right correct?

There’s an unmarked relay in the spot previously mentioned spot so I’m assuming that’s what it is. From what I can gather, 1990-on did...

I’m trying to remember if a 92 still has a side stand relay. I’ll check when I’m done drinking lol

I’ll check it but it was my understanding that if the side stand switch were bad that the bike wouldn’t even crank at all. I could be...

You have to just replace meaning it won’t run without it I’m assuming?

I hadn’t considered that. Where is the side stand relay located? I’ve been cranking it in neutral, clutch both in and out, side stand...

I’ll start off by saying that I dropped my 90’ vmax about a month and a half ago. Big patch of loose grass going through a corner...