Help Support VMAX Forum:
-
-
Nn00bzi11a replied to the thread Cannot rev past 6500 RPM under load.Well... The stator rotor is from an newer Vmax and it's the correct one for only 1 pickup coil. It seems that the wiring/CDI/pickup...
-
-
Nn00bzi11a replied to the thread Cannot rev past 6500 RPM under load.So. I didn't touch the bike because I was uncertain about what to look for. I've also been studying how does a stator / rotor / pickup...
-
-
Nn00bzi11a replied to the thread Cannot rev past 6500 RPM under load.I've replaced the clutch in this bike and a great tip was to do it in the sidestand in order to not drip any oil and avoid a complete...
-
Nn00bzi11a replied to the thread Cannot rev past 6500 RPM under load.Thanks Fire-medic and MaxMidnight for the awesome tips. So. I've spent a bit identifying some things and the discoveries are disturbing...
-
Nn00bzi11a replied to the thread Cannot rev past 6500 RPM under load.Since this bike seems to be an complete mismatched mess, I'm going to confirm that indeed there are 2 pickup coils. I've confirmed in...
-
Nn00bzi11a replied to the thread Cannot rev past 6500 RPM under load.I've digged a bit more, this time around the CDI/ECU Area. Just to be clear, this Vmax is an 85 Euro model, without Vboost. According...
-
-
Nn00bzi11a replied to the thread Cannot rev past 6500 RPM under load.Hello. I've just had it cleaned and replaced all the soft parts. Every jet hat the correct size and the main jet I recall having the...
-
-
Nn00bzi11a replied to the thread Cannot rev past 6500 RPM under load.I'm suspecting it could be the CDI since there were some significant changes made in the carbs and none of them affected the behaviour...
-
Nn00bzi11a replied to the thread Cannot rev past 6500 RPM under load.It is an original Final Drive. But has nothing to do with it. It's "only" a severe lack of power on high rpm.
-
Nn00bzi11a replied to the thread Cannot rev past 6500 RPM under load.You are right. There was a significant change when "dry Syncing" with the calipers and doing it for real with the gauges. Just to be...
-
Nn00bzi11a replied to the thread Cannot rev past 6500 RPM under load.I didn't had the chance or equipment to check the compression. I need to find someone that has the gauge for it. Same thing for the cam...
-
Nn00bzi11a replied to the thread Cannot rev past 6500 RPM under load.It could be. The timing advance box that's operated by vaccum changes it's resistance by applying vaccum. However I cannot tell if the...
-
Nn00bzi11a replied to the thread Cannot rev past 6500 RPM under load.This is a recording of the bike idling. A bit further back from the back tire, then closer to the bike, and then going away from it...
-
Nn00bzi11a replied to the thread Cannot rev past 6500 RPM under load.And Here the idle and revs in neutral (second start of the day, bike is cold but not ice cold). The bike could rev higher and quicker...
-
Nn00bzi11a replied to the thread Cannot rev past 6500 RPM under load.Here is a quick clip from today's lunch break, going 2nd and 3rd gear WOT:
-
-
Loading…
-
Loading…
