Search results

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. K

    Starter Clutch replacing

    thanks alorio... it will help me alot...
  2. K

    Starter Clutch replacing

    Dear Friends.. There is a sound like a something loos or damaging appears sometimes at motor starting , after several times, it starts normal!! Any idea what is going on?, a friend told me there is a problem in the starter clutch.. if soo,, how I can replace it in details please.,, thanx
  3. K

    HELP,, sudden problem in engin after carb installing

    I am seeing the sprk light inside the carb from the top side (air filter sid) syncronizing with the bombing sound from carb 1. That beside the unstability in the engin reving as mentioned in preavious thread I'll try to sync the carbs again and check the HT cabl and spark plug and feed back...
  4. K

    HELP,, sudden problem in engin after carb installing

    OK... I tried to find out the sound of the clicking, removed the air filter, found it came directly from the Cylinder no.1 and a kind of spark observed from the top-side, that is all in the same time of unstable engin running with high idle speed (2000) with lowest idle screw setting. I measured...
  5. K

    HELP,, sudden problem in engin after carb installing

    First of all I?d like to thank you all Vmax friends on the forum ,,, actually , I removed the carb out from the manifold, cleaned the four carbs and replaced the damaged rubber joints between the manifold and the V boost , and replaced the four air/fuel screws , rebuild the manifold, tuned the V...
  6. K

    How to remove carbs from manifolds

    First of all I?d like to thank you all Vmax friends on the forum ,,, actually ,I did it, I removed the carb out from the manifold, cleaned the four carbs and replaced the damaged rubber joints between the manifold and the V boost , and replaced the four air/fuel screws , rebuild the manifold...
  7. K

    How to remove carbs from manifolds

    Totaly agree with you ..
  8. K

    How to remove carbs from manifolds

    I'd like to know how to remove the carb out from the manifold?? it sems that it stuck,, i tried to loosen the joints and then pull the carb up from the manifold ,, but no way... any suggetion??:ummm:
Back
Top