ga_max
Well-Known Member
I recently discovered that cylinder #1 (left rear) is not heating up at the same rate as the others. I've read other posts about this and decided to try and figure it out was is happening. The first thing I did was visually check that coil and wire and cap and they all look fine (I replaced the wires and caps last year). I pulled the plug and the cone was white and no sign of fouling but some gas was on the threads towards the bottom of the plug. I put the plug back in and started the bike without the cap on the plug and it started and ran like normal. As the bike was running I grabbed the cap to put it back on the plug and got a shock when my other hand touched the frame. Is that normal ? It wasn't a major jolt just a tingle. I'm wonder what my next steps should be ? I don't have a way to sync the carbs yet but am planning on getting a carbtune soon. Thank in advance.
Doug
Doug