Recent content by haggis78

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. H

    Fuel cut off over 200km

    No mate at 200km per hour. The engine dies then picks up again straight away. No chance of getting 200km out of a tank on my beast. :rofl_200: Just seeing if the problem has happened to anyone else.
  2. H

    Fuel cut off over 200km

    Hey guys ridi g the bike the other day and fuel cut off at 200 km. I have a Morley jet kit and exhaust and airbox. I'm thinking the fuel pump can't keep up and runs out of fuel. Any thoughts anyone?
  3. H

    Clutch Piston Diameter

    Thanks Mate. That helps me out:clapping:
  4. H

    Clutch Piston Diameter

    Hi, I am replacing the stock brake and clutch master cylinders with Nissin remote resivours. I am getting 14mm for the brake (match the R1 calipers) but I do not know what size clutch diameter to get. Can anyone help please?
  5. H

    Clutch Piston Diameter

    Hi, I am replacing the stock brake and clutch master cylinders with Nissin remote resivours. I am getting 14mm for the brake (match the R1 calipers) but I do not know what size clutch diameter to get. Can anyone help please?
  6. H

    Front brake master cylinder diameter.

    So do you have 14 mm nissins master cylinder?
  7. H

    Front brake master cylinder diameter.

    The nissin calipers are 16mm. Would this make the feel harder or softer?
  8. H

    Front brake master cylinder diameter.

    Hey guys just wanted yo ask if anyone knew what the diameter of the stock brake master cylinder is? I have R1 calipers off an 02 and thinking about putting nissin remote res on just want to work out stock diameter I know R1 is 14mm.
  9. H

    Fuel leaking through breather hole on number 3

    Sorted it out. The pin the the float sits on was bent. Straightened it out and all good. Thanks for your advice Ninja....
  10. H

    Fuel leaking through breather hole on number 3

    The float chamber breather to the airbox.
  11. H

    Fuel leaking through breather hole on number 3

    Just to add it only happens when the bike is running and leaks through the needle jet hole and where you put the morley air blocker brass piece. Bike runs well just pisses out fuel..
  12. H

    Fuel leaking through breather hole on number 3

    Hello, I have been rejetting my carbies and now they are back together I am getting fuel leaking out of the breather on number 3. I think it is caused by the needle and seat. They are clean and I swapped the needle from 3 to 4 and 3 still leaks. Does this mean the seat is screwed? Is there...
  13. H

    First VMAX and in love all over again

    Thanks for the welcomes. I will get some pics up later on but it's a black 88 pretty stock ATM.
  14. H

    First VMAX and in love all over again

    Hey Guys, I am from Perth Australia. Always liked the VMAX but really have not had anything to do with the bikes until now. They are pretty rare over here. Just saying hello, I have been riding bikes since I was a kid and had nearly every engine configuration and it was time for a V4. My...
Back
Top