jms_snuggs

The issue arises due to the indicator circuit being linked with half of the brake light circuit on each side, when the indicator is...

I had no issues until I installed the integrated tail light, so I think it’s just a design flaw that the manufacturer could have easily...

Hi crynool, the reason I didn’t use a diode was because of the slight voltage drop over it and I had a sealed relay on hand. The backoff...

Makes sense in this context. I would give the diode the first shot, as this would also act as a 'separator.' I don't have a diode, but...

The issue arises due to the indicator circuit being linked with half of the brake light circuit on each side, when the indicator is...

Everything is basically done except the stroker crank. That is being done now by Marine Crankshafts. Hopefully done in 2 to 3 weeks...

Okay so my fix works, I wired in a small 20A 12V relay on the yellow brake light wire (from brake light switches to pin 85 on relay)...

The fix works, will explain below.

Here’s the link, I have a fix for the blinking ABS light too, did the fix today, just need to test ride. https://a.co/d/h4XN7vj

Does anyone have a fix for this? I just installed the amazon integrated taillight and have this flickering ABS light. I found a 18 ohm...

I had the same issue, your gear indicator switch under the transmission has a loose connection on the neutral pin due to vibration. Its...