NHMax

150,000 second owner BFF was the first and he went 115,000 of them

I split the calipers Lightly clamped .055 thick Machinist scales over the transfer ports Air hose, with thick cardboard on top of bench...

It appears that parts # 6 & 14 are the O-ring and the dust seal for one side of one caliper. I think you need double what you are...

NHMax, also consider getting a rebuild kit from AllBall Racing. I had a great experience rebuilding the calipers on my '06. The pistons...

SO my 1985 needs TWO seal kits one for each caliper Two seals and two dust seals in part number 1FK-W0047-00-00

Pulled my front calipers apart Pistons were stuck good I am confused seal kit it $80 Is that per side so I need two or per piston so I...

May have to bite the bullet and pull the carbs to clean them I couldn't get mine right so I sent them for COMPLETE rebuild thing...

Oh, before anyone hounds me, the last four of the VIN are 2573. Currently sharing a garage with my 99 Concours(project), 78...

Hello from Massachusetts! I picked up a 1985 in need of a little love recently. I will post a build thread for questions.

So Cartridge emulators are a go also So it will be apart for another week or so drat I was thinking the Gen 1 Hayabusa brake...

Yes to Race-Tech springs, my opinion is to get the firmer spring if you fall in-between rates, if you are an enthusiastic rider. YSS...

Agree with Mr Maleko but would also recommend the Gold emulators and setting that static sag to get the best out of the set-up. If you...

Racetech is top notch for 1st gen VMX12's IMO. They can be tailored to your weight since they are straight rate and the gold valve...

Ordering replacement springs thru race tech tomorrow ...unless there is a reason to go with a different brand?

WD IS orangush to start with. with