Installing a: Battery Charger Ring Terminal Harness "Quick Disconnect"

[riderboy1961]

Good Afternoon;

back on Sunday 01/26 I installed a Battery Charger Ring Terminal Harness "Quick Disconnect". I took some pictures that I am attaching.

I ran mine out the right side, directly to the right of the battery, under the Frame and zip tied it to the rear Valve Cove Hose.

I was wondering where other folks have run their Battery Charger-Quick Disconnect out of, on their 2nd Gen?

 

[riderboy1961]

Just an Update:

I took the bike for a very short ride today, when I returned home I found that the Right Rear Valve Cover HOSE got very warm/hot and this wire I zip tied to it was also Hot so I decided to Move the "Quick Disconnect" for the Trickle Charger over to the left side, I ran it under those metal tubes that are under the seat, then over the Left Side Cover. (see attached)

The Left Side Cover where I ran the wire out had a Groove in the Front Top of it that the wire fit perfectly into, I am thinking maybe that is why the groove was put there, but I don't know.