Recent content by Jonskif

In US there maybe no law for headlight always on, but there are states and countries (all in Europe) were there is law that headlight should hard wired allways on. This case for me, ignition on , headlight is on.. not good for battery.

"Ever get stuck with too little juice in the battery to start your bike? Ever find yourself in a parade and want to run without the headlight on? This brilliantly designed control system allows you to crank the bike without the headlight drawing unnecessary power from the starter. When you...

Once again Sean solved the issue got missing parts from him. Thank you!:biglaugh::biglaugh:

Sean, I sent you private mail.

Ok thank you guys. I still not sure part is right as you can see the photo nr. 2. The new part I ordered is not allowing the damper rod to come out enough through the taper, this means that when I tighten the damper rod bolt to 42nm?, the new taper is going to crack? Shouldn't the taper be...

I managed to broke one of damper rods "spindle tapers" see attachment photo. I ordered new to my vmax 2003, part #GM-23173-00-00 it looks totally diffrent( see attachment) The part I ordred cannot be the right one, damper rod do not fit in my opinion, the damper rod do not come out enough...

Do anyone know where from I can purchase rubber plugs for pilot mixture screw holes? Or do anyone know if iI can use some other manufacturers rubber plugs

I order order almost 2 weeks 07/2012, I haven?t got any information about shipping etc. I have tried to contact Paul Berkebile (www.cheetahonline.com) by mail and phone, no answers. I did cancel the order by mail, no answer.. I will contact paypal to get money back. My advice do not order...

Hi, Do anyone know where from I can find/purchase a V-boost controller connector (cylinderical)? Do someone have a burned controller, where from the connector can be taken? /Jonas

Gamorg2, I think you're right, because when turning pilotscrews out it gets richer, I got much more power ovet all rpm range. I thought this idle screw which set mixture for 0-3000rpm, this seems to be wrong thinking, correct me if I'm wrong. Hope the missing pilot screw really made richer for...

Hello, I was adjusting the pilots crews for VMax, today I found that one of the screw was missing from carburetor, what kind of damage can this cause? If pilot screw is missing is it running lean or rich? /Jonas