Search results

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Slamfire

    C.O.P kits?

    Not sure if i'm posting this in the right spot. Just wondering if anyone is making and selling cops kits?
  2. Slamfire

    Upper cylinder color?

    That looks good. So you didn't mask it off or anything? how many coats?
  3. Slamfire

    Upper cylinder color?

    I'm thinking about painting my motor this weekend since its giving rain. The only real bad part is the upper cylinders under the valve covers. They have basicly started turning white from the lack of paint. On a 97 would the upper cylinders be gloss black or flat? Any tips? The motor...
  4. Slamfire

    Motorcycle tariffs imposed - to benefit Harley-Davidson

    I had one of those. It was a blast to ride. Man I wish I still had it. But up here in Canada they were 750's.
  5. Slamfire

    170 main jet?

    So I pulled my carbs intent on re checking my float levels ( which i set last summer) Because Ive had a rich condition. I decided before splitting the rack again, I would unscrew the main jet "cap" and check out the jet size. Im not sure why i didnt check them last summer when i had them all...
  6. Slamfire

    Stock Canadian needle clip setting

    Thanks! I just went out and checked, they are in the right position. i guess ill tear them off check what jets are in there and float levels etc..
  7. Slamfire

    Stock Canadian needle clip setting

    Does anyone know the stock Canadian needle clip setting? I'm at sea level. I get a stumble cruising at 45000-5000 rpm. When I get on the throttle it goes away untill I start cruising again. I think it is running rich. I have stock modified exhaust.
  8. Slamfire

    I know cobra's have a bad name but really?

    Well I got my hands on a used set of stock pipes. The previous owner had drilled them, they sound ok. The bike seems to pull harder with them on, maybe rev faster? Besides the fact that it was hard as hell to get them on, I'm happy with them. I want to dyno it again to see if the difference is...
  9. Slamfire

    I know cobra's have a bad name but really?

    Did you notice and change in power after you drilled them ? Change the sound much?
  10. Slamfire

    I know cobra's have a bad name but really?

    He just called me. Said it showed 82 torque the second and third runs. Your right on
  11. Slamfire

    I know cobra's have a bad name but really?

    A friend and I had our max's dynoed today. His is all stock 2002 stock jets, stock air filter, stock exhaust amsoil engine oil Mine is a 1997 stock jets,stock air filter , cobra pipe 15w40 rotella he posted 117 hp/ 113 ft torque me ... 100hp and 71.75 ft torque Is it...
  12. Slamfire

    New Shinko, bumping front end

    About the fork oil, I'm not sure. I bought it in December and have yet to change it. I will up my tire pressure. So 40 psi? I do know when my previous tire was on, the problem was not there that I could notice but it was also scalloped badly and handled bad all the time. Ill also look at...
  13. Slamfire

    New Shinko, bumping front end

    Thanks for the reply, I dont think it touched the floor. I even took one off when i change dthe tire to make sure
  14. Slamfire

    New Shinko, bumping front end

    Hi Every body! Last week I put a new Shino on the front of my max. I did so because my old tire was scalloped badly. I also discovered my steering head bearings were quite loose. So I adjusted the bearings, installed the new tire and checked its ballance ( was right on no weight needed)...
  15. Slamfire

    replacement seat cover

    Hi everyone, just wondering where to go to get a stock replacement seat cover for my 97? The stock vinyl is worn and altho there are no holes yet, I want to get one before it wears thought to my seat foam. ps on hot days the seat gets realy sicky:damn angry: which I understand, is the vinyl...
  16. Slamfire

    Electric Harley

    They still cant get their throttle by wire or fuel injection to work right most of the time, so how is this going to work out :)
  17. Slamfire

    stumble at 4000rpm

    I have moved the needle one notch ( Canadian bike) and now the tips are starting to go white. I don't really dare to go further?
  18. Slamfire

    stumble at 4000rpm

    idle screws set to 2 1/5
  19. Slamfire

    stumble at 4000rpm

    stock carbs, new spark plugs, stock air filter, cobra slipons :( . Idles great. On the sync note, isn't that notly noiced at idea and slight rpms?
  20. Slamfire

    stumble at 4000rpm

    So ive been though the carbs. Dissasembled cleaned, set floats. I have not synced them yet.The bike works great. Except cruising down the highway. I can ride at 4000 rpm for 10 minutes or so no problem. After that if I Give it a little throttle she stubbles then pulls. if I wack it to wot...
Back
Top