Search results

I will take some pics tonight Becarefull clamp on frame side will break very easily at wire cutout . Not much of a difference on first few settings. There is a couple far pics on bike in for sale section Danny

Sold 1993 vmax 43k Progressive springs 2" drop Progressive 412. 11.5"rear DD clutch mod Micro machinev boost programable controller w / light Led taillight and tag holder Brake light led reflector at grab bar 4 to 2 to 1 Kerker exhaust with cut down can 10" (very load) Jetted...

I took a new job in Birmingham AL. Any maxers out there ? I'll be moving out there soon ,I don't know anyone in the area and what better place to start .

Newborn, GA

Just wanted to say thanks to the best forum out there! There is a wealth of knowledge and parts in here and i'm proud to be part of it I have been able to fix any thing i needed to with y'alls help from starter clutch , crimp fix , steering head bearings, to many small upgrades. I would not...

Congrats!!!

Thanks for the info The carrier did not have any cracks that i could see and #6 seemed to be smooth with no grooves or really worn spots I guess im going to order new carrier dogs and springs thats all i know to try If no one has any other suggestions Also it does not do it all the time there is...

What I'm calling shim is round plate that holds bearings and springs in place between gear and fly wheel can't show pics bike is back together it's my daily rider Thanks

I did starter clutch repair last year ( new bolts lock tight and pinged ) Well it started the box of rocks sound again so I tore down yesterday and the bolts were not loose every thing seemed tight a little wear in what I'm going to call a oil shim but no worse than it was last year Any...

Mine did same thing got a used one from sean works great now good luck

Check your tire and fork pressure my tire was low and started a wobble that would get violent

Great story have fun theirs a bunch of knowledge here that are glad to help

Fuel pump diaphragm and plunger were in place pump is working clicks a couple times when first cycled and keeps pressure for a while back home now that's 90 mile round trip no trouble try it again tomorrow still don't know what fixed it i did same thing last time it lasted a couple months...

Well I cleaned out fuel lines filter vent and pump(thanks to yukonerdave for great write up on fuel pump cleanout) seems to working fine after 45 mile drive to work will keep posted don't know what fixed it but so far so good any ideas let me know this is twice it happened same fix last time...

Thanks guys lots of good things to check when I get off work As for when I say misfiring it more like running out of gas although I'm going to check fire also since coils are cracked I have a little cash I wanted to buy Morley jet kit with may have to use on cops or ? Thanks again this is...

I'll check them first thing it just seemed. To be fuel related thanks I'll keep posted on progress

Well it started about a month ago bike started missing to the point of shutting off After it sat for a few min it started and made it back home so I cleaned out fuel line and pump with air ran great till this morning it happened again I pulled over and cycled fuel pump a few times till it...

I had the same problem now have micro machine controller works great I've tried several rpm settings 5000 seemed to work best for me. Enjoy:punk:

talked to sean damage was not to bad tapped tin shield back round works well starter clutch fixed as well big thanks to yukonerdave for the great how to tread

Well I was. Going to tightening my starter clutch bolts. But when removing my fly wheel one of the bolts I had holding puller broke and sent puller side ways and dented. The thin metal on inside rounded edge. Makeing a slightbunp out wards on inside is there any chance on it being fixed and or...