• If you have bought, sold or gained information from our Classifieds, please donate to VMAX Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Parts For Sale !984 VF1100s v65 Sabre Parts For Sale

VMAX  Forum

Help Support VMAX Forum:

patate657

Brownsville, tx
Supporting Member
Joined
Apr 19, 2021
Messages
611
Reaction score
431
Just picked up a 1984 VF1100s v65 Sabre. Will be parting it out. Was told 3 times it runs on Carb Spray. I'm not gonna mess with it. Cooling system still full with green Antifreeze. I will be keeping a few odds and ends for my 85' V65 Magna. I got this bike at a great savings and I will do the same for parts buyers. Engine will be sold for $150. No shipping. Pickup only. Carbs will go for $150 plus shipping (Will need Kits, I'm sure.). Anything else make me an offer once we see if I've got it. NO fuel tank. I do have the seat.
( I do need stuff for my 85' vmax and 85 v65. Willing to do trades. We'd each pay our own shipping.)
Email - [email protected]
Phone - 956-407-8353
Phil PA030005.JPG PA030006.JPG PA030007.JPG PA030012.JPG
 

patate657

Brownsville, tx
Supporting Member
Joined
Apr 19, 2021
Messages
611
Reaction score
431
Update on Parts
I have the OEM Fairing Windshield that came with this bike. Very good shape. Could use some plastic buffing for most of the scratches. No Broken pieces. Couple of very small cracks at the bolt holes. If you have any idea of their value make me an offer. I will be looking to see what they sell for.
Thanks
Phil
InkedPA040006_LI.jpg PA040005.JPG PA040007.JPG PA040008.JPG
 

patate657

Brownsville, tx
Supporting Member
Joined
Apr 19, 2021
Messages
611
Reaction score
431
Cluster off of my 1984 v65 Sabre Parts bike.
It's in pretty good shape. Seller told me all lights on the cluster turned on when cranking the bike. I've noted 2 blemish areas on the pictures. Where the ignition goes, seems to have key rubbing ware. Very little. No breaks and no cracks. Also one of the cluster mounts has a bit of a bend. Should be easy to straighten. Look closely at the plastic screens on the gages. You'll see a little bit of tarnishing. I cleaned them up a bit with Never-Dull. Figure they could still use some plastic buffing like you'd use for head lights. Again asking for offers until I can find the value of this item.
Thanks
InkedPA030016_LI.jpg PA030009.JPG PA030011.JPG PA030013.JPG PA030015.JPG PA030016.JPG PA030017.JPG
 
Last edited:

patate657

Brownsville, tx
Supporting Member
Joined
Apr 19, 2021
Messages
611
Reaction score
431
Cluster off of my 1984 v65 Sabre Parts bike.
It's in pretty good shape. Seller told me all lights on the cluster turned on when cranking the bike. I've noted 2 blemish areas on the pictures. Where the ignition goes, seems to have key rubbing ware. Very little. No breaks and no cracks. Also one of the cluster mounts has a bit of a bend. Should be easy to straighten. Look closely at the plastic screens on the gages. You'll see a little bit of tarnishing. I cleaned them up a bit with Never-Dull. Figure they could still use some plastic buffing like you'd use for head lights. Again asking for offers until I can find the value of this item.
Thanks
View attachment 80199 View attachment 80200 View attachment 80201 View attachment 80202 View attachment 80203 View attachment 80204 View attachment 80205
Cluster sold....
 

patate657

Brownsville, tx
Supporting Member
Joined
Apr 19, 2021
Messages
611
Reaction score
431
Update with another item from the 84' v65 Sabre.

Looks like it had a new cover put on it. Nicely done too. The only blemish is pointed out on one of the pictures. When I got this seat, it had a piece of tape on it. I removed the tape to check for holes and there were none, nor does it have any rips or worn areas. Tried to cleanup the spot where the tape was, but could not get it off. Even with this it looks very nice.
There are no broken tabs or cracks.
PA060029.JPG PA060030.JPG PA060031.JPG
 

Attachments

  • PA060032.JPG
    PA060032.JPG
    113.5 KB · Views: 3
  • PA060033_LI.jpg
    PA060033_LI.jpg
    349.6 KB · Views: 3
  • PA060034.JPG
    PA060034.JPG
    144.3 KB · Views: 3
  • PA060035.JPG
    PA060035.JPG
    242.6 KB · Views: 1

patate657

Brownsville, tx
Supporting Member
Joined
Apr 19, 2021
Messages
611
Reaction score
431
Got the Carbs for this Bike. Will not pull them until someone shows interest in buying. Will want $200 obo Shipped. Thanks
 

Latest posts

Top