g2gboom
Well-Known Member
- Joined
- Feb 15, 2020
- Messages
- 126
- Reaction score
- 52
I will be posting up pictures later today.
In an effort to pay for my camshafts to be resurfaced, I am posting up some parts I've acquired over the last few years. Buyer will be paying shipping, or local pickup in Wisconsin.
Online payments will be posted via Paypal.
$400 - 200 Width OEM Rear Wheel, No hardware included (ABS Sensor, Brake rotor, etc) Has new wheel bearing and has a Metzeler M880 Tire Mounted and balanced with 1000 Miles of wear. Wheel is in great shape. Only selling because I switched to an OTEC 240.
$250 - 200 Width OEM Rear Wheel, No hardware included (ABS Sensor, Brake Rotor, Etc) Condition is Acceptable. This was primarily used as my drag strip wheel. Tire will need to be replaced. Wheel itself has adhesive residue on the outside from previous owners carbon fiber vinyl. Could be removed but I never got around to it. Again im running a OTEC 240 Width wheel now so no need for this wheel anymore.
$100 - Custom Clear Clutch Cover. Bought this from a Forum member here. It works great but its starting to show its age. If you are looking for a cheaper alternative to the OTEC covers and Chinesium covers this is your best bet.
$250 - SOLD AND SHIPPED - Throttle Body and Injectors: Came off a 2017 with 32k miles on it. Im only selling because I managed to snag a brand new throttle body and injector set for dirt cheap from a liquidation sale. This would be perfect for someone who needs spare parts, injectors, sensors, etc. It works perfectly fine. Recently synced.
$150 - OEM Mufflers/Slip Ons. I tried polishing the end caps but I suck at it. Visibly these are in good shape otherwise.
$125 - Sato Racing Frame Sliders - These are used in good shape. Left side Plastic bit has the Sato Racing Decal Scratched off when I dropped my bike in my driveway. These work great for exactly that purpose. They have served me well. No longer needed.
$150 PENDING - Exactrep Fiberglass Belly Pan unpainted - I ended up getting a custom aluminum skid plate from a guy on facebook who makes them. Decided to go that route and now the fiberglass one has been collecting dust. Thought this would look cool with a paint match or carbon fiber
I think thats everything for now. Again Ill try and get pictures posted up tonight. Feel free to respond on here or message me directly. Thanks everyone and I hope to hear back from you guys soon!
-Brandon
In an effort to pay for my camshafts to be resurfaced, I am posting up some parts I've acquired over the last few years. Buyer will be paying shipping, or local pickup in Wisconsin.
Online payments will be posted via Paypal.
$400 - 200 Width OEM Rear Wheel, No hardware included (ABS Sensor, Brake rotor, etc) Has new wheel bearing and has a Metzeler M880 Tire Mounted and balanced with 1000 Miles of wear. Wheel is in great shape. Only selling because I switched to an OTEC 240.
$250 - 200 Width OEM Rear Wheel, No hardware included (ABS Sensor, Brake Rotor, Etc) Condition is Acceptable. This was primarily used as my drag strip wheel. Tire will need to be replaced. Wheel itself has adhesive residue on the outside from previous owners carbon fiber vinyl. Could be removed but I never got around to it. Again im running a OTEC 240 Width wheel now so no need for this wheel anymore.
$100 - Custom Clear Clutch Cover. Bought this from a Forum member here. It works great but its starting to show its age. If you are looking for a cheaper alternative to the OTEC covers and Chinesium covers this is your best bet.
$250 - SOLD AND SHIPPED - Throttle Body and Injectors: Came off a 2017 with 32k miles on it. Im only selling because I managed to snag a brand new throttle body and injector set for dirt cheap from a liquidation sale. This would be perfect for someone who needs spare parts, injectors, sensors, etc. It works perfectly fine. Recently synced.
$150 - OEM Mufflers/Slip Ons. I tried polishing the end caps but I suck at it. Visibly these are in good shape otherwise.
$125 - Sato Racing Frame Sliders - These are used in good shape. Left side Plastic bit has the Sato Racing Decal Scratched off when I dropped my bike in my driveway. These work great for exactly that purpose. They have served me well. No longer needed.
$150 PENDING - Exactrep Fiberglass Belly Pan unpainted - I ended up getting a custom aluminum skid plate from a guy on facebook who makes them. Decided to go that route and now the fiberglass one has been collecting dust. Thought this would look cool with a paint match or carbon fiber
I think thats everything for now. Again Ill try and get pictures posted up tonight. Feel free to respond on here or message me directly. Thanks everyone and I hope to hear back from you guys soon!
-Brandon
Last edited:
