Chrome Exchange

[one2dmax]

Chrome Exchange Updated Price List

OK guys and gals. I finally have an updated price list for my new chrome exchange program. Most of the items listed here will be available when we come to Thunder (should be here in time before we leave to drive there we hope). Of course my VMOA friends will enjoy a discount on larger orders. ACTIVE VMOA members with orders of $300 or more will get 5% off of parts sent in direct and 10% off of the stocked parts. $500 or more will get 10% off sent in parts and 15% off stocked parts.

If you want to reserve any of the items you can paypal me the funds in advance. I do have a number of sets of scoops and sidecovers but the are limited. I also have a number of the other parts but of course I don't have enough for everyone. Email me directly with any interest and to make sure I have enough stock for your needs.

Keep in mind that I have two price levels. The least expensive pricing is for using your parts and you doing the waiting (time varies from as little as 3 working days for over-night parts to as long as 15 working days for ground shipments). The second tier is for parts I have on hand which covers my shipping and overhead. If we use my parts your parts will need to be in good condition for the next guy. Some minor scratching in the paint would be fine.

A correction to my previous email is the Black Chrome (black Nickel). It is available and I should have a couple of pieces for viewing/sale and will run 20% more cost then listed.

Part # - Item Description ? Price each Your Part - Unit Price My Part w/Exchange

1AY - YAMAHA INTAKE SCOOP - 90.00 ? 115.00

2YY ? SIDE COVER Without Logo - 70.00 ? 90.00

3YY ? SIDE COVER With VMAX LOGO ? 80.00 ? 100.00

4TY ? STOCK REAR GRAB BAR ? 80.00 - 100.00

5Ely ? YAMAHA BACKREST ? To Be Determined

6OLa ? HANDLEBAR RISER HOUSING ? 45.00 ? 60.00

7ML - RISER CLAMP ? 25.00 ? 35.00

8OTy - RISER COVER (CROWN) ? 45.00 ? 60.00

9MLy ? HEADLIGHT BRKT ?Yamaha? ? 25.00 ? 35.00

10MLY - CARB COVER ? 25.00 ? 35.00

11MKy ? WATERPUMP/GEAR COVER INSERT ? 25.00 ? 35.00

12ML ? DRIVER FOOT PEG ? 25.00 ? 35.00

13MLy ? PASSENGER FOOT PEG ? 25.00 ? 35.00

14Ay - OIL CAP ? 15.00 ? 20.00

150 ? TIMING COVER INSPECTION PLUG ? 4.00 ? 6.00

16NOy ? DRIVERS PEG BRACKET ? 45.00 ? 60.00

17MA ? FRONT ENGINE MOUNT BRK ? 25.00 ? 35.00

18YOkt - TRIPLE TREE UPPER OR LOWER ? 70.00 ? 90.00

19My - BOLT or NUT ? 2.50 ? 4.00

20OY - FLYSCREEN WINDSHIELD MAIN BRK - 35.00 - 50.00

21MA - FLYSCREEN WINDSHIELD MOUNTING BRK - 25.00 ? 35.00

22OLy ? BRAKE STAY BAR ? 40.00 ? 55.00

23OLy - SUPERBRACE FORK BRACE ? 40.00 ? 55.00

24NOy ? STOCK FORK BRACE ? 45.00 ? 60.00

25NOy - FOOT PEG BRK W\ 4 HOLES ? 45.00 ? 60.00

26NTy - FOOT PEG BRK W\ 6 HOLES ? 50.00 ? 65.00

27MA - HAND LEVER ? 25.00 ? 35.00

28MLy - SHIFT LEVER BRK - 25.00 ? 35.00

29Yy - TAPERED CONES W\ 1 HOLE ? 10.00 ? 15.00

30MSy ? CYLINDER HEAD COVER PLATE ? 15.00 ? 20.00

31MY - SWITCH HOUSING (EACH HALF) - 25.00 ? 35.00

32OKen - BRAKE PEDAL - 45.00 ? 60.00

33NOay - FOOT PEG BRK 1 W\ 4 HOLES 1 W\ 6 ? 45.00 ? 60.00

34LY - STATOR COVER ? 110.00 ? 135.00

35LY - VALVE COVER ? 110.00 ? 135.00

36NLy ? MIDDLE GEAR COVER ? 55.00 ? 70.00

37AY - CLUTCH COVER - 100.00 ? 125.00

38TY - WATER PUMP HOUSING ? 80.00 ? 100.00

39OL - T STAT HOUSING - 35.00 ? 50.00

40OY ? CLUTCH INSERT ? 35.00 ? 50.00

41OTy ? STATOR INSERT ? 35.00 ? 50.00

42OTy ? WATERPUMP COVER - 35.00 ? 50.00

43MOy - SMALL SHIFTER PIECES W\ BALL ? 20.00 ? 30.00

44OM - SHIFTER ARMS W\ BALL JOINT - 30.00 ? 40.00

45Yll - AXLE SPACER 10.00 ? 15.00


Later,
Sean Morley
316-619-8411

 

[shawn kloker]

Hello All,

I just sent a large batch of parts in to the chromer for plating. I expect to have them back in time to bring with me to Thunder in the Valley. Anyone interested in any parts can email me directly for pictures of the first test parts and prices. Reserve your parts in advance before the stocked items are sold out!

I sent in a lot of parts including:
Scoop sets (7 pairs)
Side covers (4 pairs - 2 of which are the embossed 85's)
Triples (1 set of each)
Upper crowns, clamps, risers (2 of each)
Pegs (2 sets)
Mini windshield brackets (2 sets)
Engine covers - clutch, stator, waterpump, middle drive gear, cylinder head covers, valve covers (2 sets of about everything except 1 set of valve covers)
Backrests and grab bars (2 of each)
Shifters, Brake Lever, master cylinder levers (3 sets of each)
Main Passenger Peg brackets (1 set)
Swingarm (1)
Brake stay and bracket (2 sets)
Side Cover bolts (2 sets)
Carb Covers (2 sets)
And More ---


The prices will be two tiers:

In stock Chrome parts will be more since I have to pay shipping to and from.

Parts sent directly will have less cost since you will be sending them in and recieving them directly back. Turn around time on parts sent directly ranges form 10-15 working days if you ship them ground. You can get them quicker if they are shipped to them by express.

Sean Morley
Morley's Muscle
[email protected]
316-619-8411

I would like to see a price list.

 

[KRL0215]

id be interested, but Im sure its probably out of my price range

 

[Buster Hymen]

I'm interested in the valve covers and the price for doing a swing arm. I've welded brackets on mine for the hugger fender so I wouldn't be able to use your already chromed swing arm.

 

[Max01red]

Could we get this made a "Sticky"????