Hi folks,
I'm new to this community joining from EMEA / Germany and wanted to share that I built a quite nice looking LED headlight replacement. I used a "Highsider Pecos LED Type 7" e.g. HIGHSIDER LED Hauptscheinwerfereinsatz TYP 7 mit Standlichtring rund Chrom 5 3/4 4054783254309 | eBay nice chrome housing, eagle eye driving light and over all good looking also from the front.
The mounting at the lower end fits almost perfectly to the original bracket, I added just one washer.
Then I used some force to drill two additional holes in the chrome housing on the back. One to also have a screw to the upper bracket, so that it cannot move up and down.
And a bigger one replacing the simple wire outlet to move all the wiring inside like with the original housing. Did a quick test drive this evening and I really like it. The only thing I'm missing is an additional switch so that I can turn of the low beam and use the eagle eye ring instead, when driving during the day.
Full res. VMax LED Headlight
Br Steve
I'm new to this community joining from EMEA / Germany and wanted to share that I built a quite nice looking LED headlight replacement. I used a "Highsider Pecos LED Type 7" e.g. HIGHSIDER LED Hauptscheinwerfereinsatz TYP 7 mit Standlichtring rund Chrom 5 3/4 4054783254309 | eBay nice chrome housing, eagle eye driving light and over all good looking also from the front.
The mounting at the lower end fits almost perfectly to the original bracket, I added just one washer.
Then I used some force to drill two additional holes in the chrome housing on the back. One to also have a screw to the upper bracket, so that it cannot move up and down.
And a bigger one replacing the simple wire outlet to move all the wiring inside like with the original housing. Did a quick test drive this evening and I really like it. The only thing I'm missing is an additional switch so that I can turn of the low beam and use the eagle eye ring instead, when driving during the day.
Full res. VMax LED Headlight
Br Steve