leaky

When changing the starter on my 1986, I had to remove the thermostat housing and tubes. I discovered the steel tube (see attached picture) to the right of the thermostat housing is in bad shape. It is corroded and has several holes. Anyone know where I can get replacements? Should the steel...

Ok, I have been searching and searching. Everyone keeps saying for gas to come out of the top vent tube is a stuck float. I have pulled the rack and cleaned them, twice. I have also switches the float valve with the one next door and it's still leaking. Could the float itself not be floating...

Using the great info on this site, I determined my stator was bad and replaced it. Unfortunately when all back together, the side cover gasket leaks oil. What is the best way to do this over with no leaks. I used new OEM gaskets on both covers. Do you think I can use the same gaskets since...

Hi Guys, Since my bike was knocked over a few weeks ago, I've noticed gas coming out of one of the rubber tubes coming from a carb. It's only happening on one, and it's very little that I see. It is always wet though, so when I'm riding, it could be coming out more. I saw that there is a...

Got a leaking fork seal that needs replaced. Going to do both sides, naturally. Then, after checking all the posts I could find on the forum, I also decided to install progressive springs while I'm there. I ordered stock dust seals, oil seals and copper gaskets for the bottom hex bolts. And...