vibration

Yamaha Star V-Max VMAX Motorcycle Discussion Forum

Help Support VMAX Forum:

  1. Osiris

    Frame brace vibration.

    I installed some frame braces yesterday. It did tighten up the bike and made the handling a bit better. I do have a bit more vibration now. Is this normal? Is there anything that I can do to cut down on the vibration? Sent from my SAMSUNG-SM-G900A using Tapatalk
  2. Conman

    Possible 3rd Gear Issue?

    Hi, I bought an 88 Vmax a few weeks ago and I've noticed that when shifting from 3rd to 4th there is a significant amount of vibration coming from the foot shifter in the split second when I've got the clutch pulled in and my foot has the shifter raised. It doesn't always do it but it happens...
  3. 94 V-Max Rider

    Bar Snake

    http://www.barsnake.com/ I highly recommend this product to those who have problems with their hands tingling or going numb while riding. It's not going to cure the problem completely, but it will greatly reduce the vibration resonating through the handlebars and make your riding experience...
  4. 0

    Bike shakes and high pitch vibration

    My 2006 Vmax handlebars will shake at all speeds. I can let go with one hand and the handle bars will shake back and forth like a cars stearing wheel when a tire is out of ballance. When my wife is riding on the back the shaking goes away. Also when my wife is riding with me I get an...
  5. D

    vibration in handlebars

    Anybody try that "bar snake" that is supposed to dampen the buzzing vibration through the bars ? My friggin hands keep goin numb after about 45 min. at a constant rpm
  6. mavgrab302

    vibration

    I've had a vibration for a while now, didn't happen suddenly but started some time since I've gotten my metzler and my marks exhuast. It has a small vibration around 45-65 in fitfh and/or around 4000rpm, it's avibration that tickles your ass and makes your hands itch...lol when feeling around...
  7. wingrider

    Any luck fixing handlebar vibration?

    Hey All, Among the many projects I did this spring, I put solid engine mounts in my 97, along with that, I sync'd the carbs, put new progressive shocks in the rear, (front springs were last summer) put bar end mirrors on it, and put a Morley seat on it. I'm sure it's because of the solid...
  8. firefly

    After market handle bars & vibration reduction

    After market handle bars & vibration reduction To drastically reduce handle bar vibration effectively! 1- Get some fine dry sand, place it in a pan in the oven for 30 min to remove all moisture and living organisms. 2- Some after market handle bars come plastic bar ends, remove one of...
Top