butterfly shaft seal

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

telebb

Member
Joined
Nov 21, 2022
Messages
17
Reaction score
8
Location
MI
Hey guys,
going through the carbs and one of them was hanging up a little and not closing all the way all the time and I found that 2 orings in place of the seal that was there on the butterfly shaft under the c clip and washer. This is causing to much friction and holds the carb open enough to throw off syncing. Can you still get those seals or any suggestions? Thanks
 

Latest posts

Back
Top