Launching the Gen 2 at the strip-videos or tutorials

[1badmax]

I wanting to get my 16 to the local track to see what it will do. It's been many years since I had my 85 Max and 01 CBR 1100XX on the strip and I know the key is getting it off the line without spinning or bogging too much. Anyone know of any videos or tutorials on the Gen 2 in launching it, I have gone through Dale Walker's documents on the Gen 1, which some things pertain but as most know the Gen 2 is a totally different bike. TIA

 

[one2dmax]

Very similar to the gen 1. But, have you reflashed your gen 2 yet? If not you will have a little tougher time overcoming bog since the throttle only gives 50% to the bike of the users input.

 

[1badmax]

Very similar to the gen 1. But, have you reflashed your gen 2 yet? If not you will have a little tougher time overcoming bog since the throttle only gives 50% to the bike of the users input.

Yes, reflashed, MAB, Akra mid pipe with stock exhaust, DD to clutch. Thanks Sean

 

[Parminio]

Or you could go full Jon Cornell with his 8 second Gen 2 Vmax:

 

[1badmax]

Or you could go full Jon Cornell with his 8 second Gen 2 Vmax:

Nice, but I use this going back and forth to work a lot. Just trying to get in the nines if possible???

 

[one2dmax]

Going full Cornell on that pass was also with a Nitrous system installed.