Main jets

[spyder13]

With a hindle header and kerker k series can what main jet is suggested?

 

[one2dmax]

what jet kit if any? If no jet kit - 150 mains.

Sean

 

[spyder13]

No jet kit. I have shimmed needles 1 washer.

 

[one2dmax]

Probably don't need to shim the needles. 150 mains would be around the optimum in most cases.

Sean

 

[spyder13]

so your saying I don't need to shim needles and should run 150 mains with a full header on my bike.

 

[one2dmax]

You should have adjustable needles so you need to adjust them down to lessen up the fueling in the midrange. The main will effect the entire range too so do that first. Then adjust the needle downward.

I sent you info on my kit as requested too.

Sean

 

[MAXXMAN93-4301]

Can i get just the needles somewhere or do i have to buy a whole kit ?

 

[one2dmax]

Normally a complete kit. I do have a few needles only for those interested. They run $60 for the set.

Sean

 

[spyder13]

Hey Sean still thinking about the air box mod.

 

[one2dmax]

It would maximize the stock carbs and engines capabilities.

Sean

 

[spyder13]

Hey Sean how much noise comes from the air box kit?