Need electrical problem help please!
- Thread starter fatbiker
- Start date
-
- Tags
- electrical problem
Help Support VMAX Forum:
fatbiker
Well-Known Member
Ran the bike till it was good an hot then tested the pickup coils again. They all came around 138 give or take a little. Temperature is 90 degrees and bike was near the redline.
Found out the fan is not engaging and the 10 amp fuse was popped. Put another one in and it popped immediately. Must be a short somewhere or the fan has taken a dump.
Fatbiker
Found out the fan is not engaging and the 10 amp fuse was popped. Put another one in and it popped immediately. Must be a short somewhere or the fan has taken a dump.
Fatbiker
Yeah, I tested mine after it ran a bit and the resistance value went up. I guess that's normal? I inspected my coils and they look fine. As long as they aren't cracked they should be ok. I have been told that even if they are cracked you can silicone the cracks and you will be good to go. I'm waiting for a new ignition module to show up to try.
leroycp
Well-Known Member
Don't forget to go back and check those front signals with meter and recheck every connection you began with.
