Media added by gentsvmax

Navigation

  1. Example Category 23
Browse albums

Most media items

  1. Buster Hymen
    168

    Buster Hymen

  2. Rusty McNeil
    100

    Rusty McNeil

  3. DMAN999
    97

    DMAN999

  4. MaxMidnight
    97

    MaxMidnight

  5. ninjaneer
    96

    ninjaneer

Media statistics

Categories
1
Albums
1,241
Uploaded media
9,130
Comments
616
Disk usage
1.2 GB
Shop deals on ebay
shop deals on amazon
Advertise with us
VMAX Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
PC130001

PC130001

  • 0
  • 0
When I saw the forward controls on ebay I knew what mods were to be made right out of the box. I have found that being able or willing to mod some par

When I saw the forward controls on ebay I knew what mods were to be made right out of the box. I have found that being able or willing to mod some par

  • 0
  • 0
My bike looked great before the swap, but what a big improvement.

My bike looked great before the swap, but what a big improvement.

  • 1
  • 0
The venture rear end makes for 75to 80 mph at about 4200 rpm, I'm going to check that to be sure, but its ALOT better than stock gearing.

The venture rear end makes for 75to 80 mph at about 4200 rpm, I'm going to check that to be sure, but its ALOT better than stock gearing.

  • 0
  • 0
After a lot of web research and having my H.I.D headlight shut off on me, I found the Mosfet FH001 regulator, no load voltage is 14.2 on my bike. The

After a lot of web research and having my H.I.D headlight shut off on me, I found the Mosfet FH001 regulator, no load voltage is 14.2 on my bike. The

  • 0
  • 0
PC130002

PC130002

  • 0
  • 0
20161022 155353

20161022 155353

  • 1
  • 0
Here I'm holding the salvage yard shifter for my homemade forward controls, if you notice that footrest is the right side rear brake assembly. It made

Here I'm holding the salvage yard shifter for my homemade forward controls, if you notice that footrest is the right side rear brake assembly. It made

  • 0
  • 0
IMAG0163

IMAG0163

  • 1
  • 0
20160813 173301

20160813 173301

  • 0
  • 0
The blinker ears and the rear reflector assy. have to be modified, ...my specialty!

The blinker ears and the rear reflector assy. have to be modified, ...my specialty!

  • 0
  • 0
This is a "file" photo of a Morley's Muscle clear lens with a Bike Master H.I.D. system. A true high intensity discharge, super bright, white light fl

This is a "file" photo of a Morley's Muscle clear lens with a Bike Master H.I.D. system. A true high intensity discharge, super bright, white light fl

  • 1
  • 0
20150625 203205 (2)

20150625 203205 (2)

  • 0
  • 0
Switched this out during the swap.

Switched this out during the swap.

  • 0
  • 0
The faux tank is steel, but the fenders are both plastic. I'm not a body man so the first place I touched on the front fender is about an 8th inch thi

The faux tank is steel, but the fenders are both plastic. I'm not a body man so the first place I touched on the front fender is about an 8th inch thi

  • 0
  • 0
Here are all the one off foreword control parts fresh from powder coat, ready for assembly.

Here are all the one off foreword control parts fresh from powder coat, ready for assembly.

  • 0
  • 0
20160807 095207

20160807 095207

  • 0
  • 0
MadMax, that dude aint no joke! Email me or call for any questions about any of the swaps I have shown.

MadMax, that dude aint no joke! Email me or call for any questions about any of the swaps I have shown.

  • 0
  • 0
Out with the old (not so old R1 wheel) and in with the new. Avon 300...Woe!

Out with the old (not so old R1 wheel) and in with the new. Avon 300...Woe!

  • 0
  • 0
Tab on

Tab on

  • 0
  • 0
Tig time, a crude but effective fixture made the new brake side control rod run below the clutch cover instead of across it as shown on ebay.

Tig time, a crude but effective fixture made the new brake side control rod run below the clutch cover instead of across it as shown on ebay.

  • 0
  • 0
I couldn't believe how cool some of this stuff fell into place, I didn't keep this set-up just because of the chin scoop.

I couldn't believe how cool some of this stuff fell into place, I didn't keep this set-up just because of the chin scoop.

  • 0
  • 0
This is the completely rebuilt motor, stock but bullet proof with Popper stopper, oil pump upgrade and the pride of knowing I did it myself,(nobody to

This is the completely rebuilt motor, stock but bullet proof with Popper stopper, oil pump upgrade and the pride of knowing I did it myself,(nobody to

  • 0
  • 0
For this Ignatech programmable igniter, from Sean, Morley of course. I was having #3 spark issues from hell and believe me I trouble shot the hole sys

For this Ignatech programmable igniter, from Sean, Morley of course. I was having #3 spark issues from hell and believe me I trouble shot the hole sys

  • 0
  • 0
Back
Top