joint

Two robbers walk into a cop bar... https://www.yahoo.com/news/m/7746fdd5-15d9-3d76-b27c-755030cf0420/ss_no-joke%3A-robbers-walk-into-a.html I guess we should be happy they're so-stupid, it keeps them off the street.

Has anyone had any issues with the gen 2 master cylinder joint snapping where it attaches to the brake pedal? Mine had the bottom break off were the pin goes through 2000 miles. Seems to be a cheap casted part.

Is it easy to remove the circlip and bearing/pin so as to separate the UJ ? I need to do this so I can put a spindle through to set up the fjr arm. From reading on here I see undoing the yoke securing nut is a hard job unless the yoke is separated. With half the UJ gone I'd have enough room.

Hi folks- Mikes's recent misfortune (Drivetrain forum - "Broken parts and shrapnel"), has got me a tad worried about the health of my own bike's final drive components. The Clymer manual does not list any intervals for inspecting, tightening, or lubricating the driveshaft splines, the...

Getting my 05 stock exhaust ready for Ebay and noticed my left exhaust joint has a bolt broken off in it from the PO. I know I can have it drilled out and tapped but I figured I would check to see if anyone has one laying around so I don't have to bother the guys at work. There is a difference...

The screws that hold the carb cover on are phillips head and the bike came with them horribly stripped. The previous owner told me about this at the time of purchase. I tried using the screw extraction tool I got from home depot and its a no go. It just files off more of the bolt. I've read...

Hi, I have an 88 model vmax that has started leaking coolant from the cylinder head water jacket joint. The workshop manual states only to remove them only when essential eg engine overhaul. Wanted to remove them and replace the o-rings and stop the leak, trouble is they are made out of bakelite...

Hi, On my old 85 max, the water joint seems to be porous. I can paint it, but after a couple of months, the paint gets blisters and falls off. Does this also happen with the newer joints? Also, there are after market parts like below, but all I can find are custom CNC pieces that are out of...

How do you remove water jacket joint? I do have a leak in there.I did removed pin,but can not pull it out. Thank you.

It's a small black plastic cube looking device. It has what looks to me like a white dial built into it on the face and a very small dia tube (possibly 1/16" or a gnat's ass bigger) that punches through the Air Cleaner Joint. The other end of this item has another tube to which a small clear...