a/f mixture question

[mattmullins]

Just put the dj stage 1 finally got tuned pretty decent. Was checking the plugs all looked ok except for one had a lot of carbin so was wondering there all turned out 3 1 /2 turns do they all have to be the same or can you adjust them individual at different turns each.

 

[65fury]

Nope, you can adjust each screw individually. Usually start at 2 turns out on all, and slowly turn each one out a little more if you get popping on deceleration or down shifting, popping means its to lean on the idle circuit. also make sure all the A/F screws have a spring, washer and small rubber o-ring. With out these itll give you rough idle or sometimes a carb will run richer than the others(ive had this issue before)

Jason