Headlight and cowl for the gen II

[Static4orce]

I'm sure alot of members have seen the website article on the blue 580hp turbocharged Vmax. Ever since I saw those pictures I wanted that Bikini Cowl. Low and behold I found it on Amazon. I've never vinyl wrapped before so ignore the temporary imperfections until it gets painted.

 

[ChrisW]

I'm sure alot of members have seen the website article on the blue 580hp turbocharged Vmax. Ever since I saw those pictures I wanted that Bikini Cowl. Low and behold I found it on Amazon. I've never vinyl wrapped before so ignore the temporary imperfections until it gets painted.
View attachment 94170View attachment 94171

I'm sure alot of members have seen the website article on the blue 580hp turbocharged Vmax. Ever since I saw those pictures I wanted that Bikini Cowl. Low and behold I found it on Amazon. I've never vinyl wrapped before so ignore the temporary imperfections until it gets painted.
View attachment 94170View attachment 94171

Hey,like that have a 18 same color. Could you send me the link from Amazon? Just received Mike Kemp’s halo kit that looks sic.

 

[Static4orce]

Motorcycle Parts Center general-purpose φ180 bikini cowl black 308 702 https://a.co/d/8h1CWnF
2 left. I had to buy a 7" headlight bucket, headlight mount with 52mm fork clamps (I milled some 50s), a sealed beam, and make bushings/spacers to take up space between everything because the fork spacing is very wide and the cowl is a few inches wider than the bucket. You'll need to make braces to go between the upper and lower OEM headlight brackets because the tach won't stay on its own. Come winter I plan on welding a lower mount bracket to the braces to pick up the mounting hole on the bottom of the cowl.

 

[DRWard]

Hey,like that have a 18 same color. Could you send me the link from Amazon? Just received Mike Kemp’s halo kit that looks sic.

That setup above looks nice, but if you're looking for something that is an easy bolt on, take a look at the one made by Magic Racing in Japan.
It is 6 bolts, washers and nuts and full carbon. Very light.

Here is a link to Webike that sell it.

https://japan.webike.net/products/9690574.html

It took a couple of months to get, but I really like it. They had two chioces of fiber and either tinted or clear shield.