Need 1998 VMax pilot screw orings

[Beau-Kat]

My 1998 Vmax is getting a little old and I'm cleaning out the carbs.
Need to replace the old o'rings on my pilot screws.
Anyone know of a source for just the o'rings?

What size are mine from this chart?

O-RINGS and U-RINGS Mikuni and Keihin
MIKUNI
O-Ring description Size inside diameter (mm) & thickness Mikuni reference Order number 1.80mm I.D. x 1.15 mm N124.063 007-163 2.4mm I.D. x 1.6mm 18-4636 Pilot Air Screw 2.50mm I.D. x 1.55 mm VM14/75 002-676 Pilot Air Screw 2.70mm I.D. x 1.13 mm N133.037 002-858 3.05mm I.D. x 1.35 mm B30/205 007-188 3.55mm I.D. x 1.78 mm BV32/04 002-212 3.7mm I.D. x 1.8 mm

Thanks.
Rusty

 

[Traumahawk]

Try BRC carb shop IE Dannymax. I know that he would keep some on hand.

 

[dannymax]

Yup, I got them, drop me a PM.

 

[Beau-Kat]

Thanks.
PM sent (at least I think it went).

 

[maleko89]

My 1998 Vmax is getting a little old and I'm cleaning out the carbs.
Need to replace the old o'rings on my pilot screws.
Anyone know of a source for just the o'rings?

What size are mine from this chart?

O-RINGS and U-RINGS Mikuni and Keihin
MIKUNI
O-Ring description Size inside diameter (mm) & thickness Mikuni reference Order number 1.80mm I.D. x 1.15 mm N124.063 007-163 2.4mm I.D. x 1.6mm 18-4636 Pilot Air Screw 2.50mm I.D. x 1.55 mm VM14/75 002-676 Pilot Air Screw 2.70mm I.D. x 1.13 mm N133.037 002-858 3.05mm I.D. x 1.35 mm B30/205 007-188 3.55mm I.D. x 1.78 mm BV32/04 002-212 3.7mm I.D. x 1.8 mm

Thanks.
Rusty

The o-rings can be had here for $.50 a piece.

http://newmotorcycleparts.net/fuel_system_parts/special_fuel_o-rings.html

They are part OR-4632. O-ring dimensions are 2.65mm x 1.15mm.

I had to go back 10+ years for this information....pre vmaxforum.net :biglaugh:

I'll make the o-ring information a sticky in the Carbs section.

Cheers,

Mark

 

[Beau-Kat]

Thanks!
Great price.
But I see they have a minimum order of $10, plus $6 shipping. So I'd have to order 20 of them for a total of $16.
Still, not an overall bad price, but I would probably lose 16 of the 20 before I needed them next time.
Already got mine from Dannymax.

 

[maleko89]

Thanks!
Great price.
But I see they have a minimum order of $10, plus $6 shipping. So I'd have to order 20 of them for a total of $16.
Still, not an overall bad price, but I would probably lose 16 of the 20 before I needed them next time.
Already got mine from Dannymax.

Awesome, I would too. I wanted to post mostly for the dimensions of the o-ring.

 

[blaxmax]

Awesome, I would too. I wanted to post mostly for the dimensions of the o-ring.

Appreciated- I sent to a few members on other sites looking also.