leds

Is anybody using these? Could be useful https://youtu.be/wj2wM2GO2ts

Is anybody running the new version dyna 3000 ignition? My green led is blinking as it should be but the red led is on solid when the bike is running and the instructions don't make any reference as to what it should be doing when the bike is running.

I saw a pic of a max with LEDs in the scoops. will that person post a "how to" for them or PM me? and post some pics? Please Thank you got looking,,,Tony

ok I put the warning label on the Max and installed the RED and Green LEDs in the cluster. see pics. So, here is what I have done, AGM battery Dingy's 4 gauge wire set, Crimp fix, stater clutch repair, What is my next needed thing to do? It runs great..... Thank you for looking. Tony.

Has anyone taken the air scoops and actually drilled out the "YAMAHA" and put lights behind them? i was toying with the idea, it would look pretty cool they would be black, till you turned the key on and they lit up with whatever color light you have behind them. i was thinking blue, since blue...

Hi.My name is Ernie. I'm new to this forum. Can anyone tell me where I can find integrated LED taillights for my 2006 Vmax?

I received the oval 8 high power LED, they say they emit 1700 lumen each housing, I really didn't believe it BUT they are really that powerful & very noticeable, the other day I saw a truck with the same lights in the daytime from more than half a mile, it stuck out from all other headlights...

i put led turnsignal on my max and now all the lights flash like hazard lights on a car. i am is this because of low watts and if so what resistors should i use to fix the problem

Here a few pics and items purchased to do this project plus a 1st grader schmatic...lol LEDS: (18) 25mA, 3.3v, white 7000mcd, 30 deg resistors: (6) 100 ohm, 1/2 watt, 5%tolerance( brn, blk, brn,gld,band circuit board: (2) 1.5" x1.5" red reflectors: 4x1" rectangular (from Grainger) for anyone...

I made two small circuits today each having 3 leds on them, white 3.5 volt, 5mm , with two 150 ohm 1/2 watt resistors. anyways made them but don't like what the look like through the scoops, it looks like bulbs behind the wire mesh, I'm shooting for glow. so my question is what will let...

First off, I want to say thanks to Jamie for posting this thread. http://www.vmaxforum.net/showthread.php?t=3135&highlight=grab&page=2 I recently put on some LED signals. As anticipated, I had some issues with the flash rate or just getting the signals to flash at all. I did a few different...

had led's on front 'bulb s on back 'now put the small leds on the back 'when i plug them on and turn them on' all four start flashing,what is up?

Has anyone tried replacing the stock tail light bulbs with Spinner LEDs? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=330329114710&ih=014&category=35580&_trksid=p3911.m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D3%26ps%3D5 Of course, you would also need to invest in some...

Would these work? http://www.jpcycles.com/productgroup.aspx?GID=4c4b4984-8464-4612-a2d7-4969d6b0145b I know someone had asked about this in another thread... \m/ DS