turn

Advertise with us
Shop deals on ebay
shop deals on amazon
VMAX Forum

Help Support VMAX Forum:

  1. L

    Flasher unit for LED turn signals.

    I am planning to convert my '92 to LED turn signals and noticed the flasher unit is a rectangular unit with maybe 5 wires. I've converted a 650 Honda and 650 Kawasaki in the past and they used the common automotive style round 3 wire flasher unit. I was able to buy an LED flasher unit for those...
    • Lucky13
    • Thread
    • flasher led signals turn unit
    • Replies: 4
    • Forum: Electrical
  2. ga_max

    SCOOPS, Handlebar, Turn Signal

    I'm selling a few parts off my 94. The scoops are in good condition with minor scuffing on the front edge of one and some clear coat issues. I did my best to show everything in the pictures. Scoops: $100 + shipping Handlebar: $25 + shipping Turn Signals: 20 + shipping Send me a PM is...
  3. D

    gen 1 turn signal bulb #

    I want to switch my turn signals to LED any idea what part # they are.. there not 1157 or 1156..
  4. R

    New guy, first vmax, turn signal issue

    I just picked up my first vmax (94, yellow, and awesome)! The left rear turn signal was broken and there were about 6 sets of new turn signal packages in one of the boxes of parts that came with the bike. They are K&S 25-8300 or something like that. They mount and work, but the stem/bolt...
  5. bipick

    Turn signal lenses

    Does anybody know where I can get clear or smoked blinker lenses that fit the stock Gen 2 turn signals
  6. bipick

    Turn signal lenses

    Does any body know where I can get clear or smoked lenses to fit the stock blinkers on a Gen 2
  7. mikeinga

    Turn Signal nut

    Quick question tools are 100 miles away I need a wrench to get turn signals off can anyone tell me the nut size so I can go buy a wrench. Sent from my SAMSUNG-SM-N910A using Tapatalk
  8. labargeblake

    Replacing Turn Signals

    Any suggestions on how to remove the front turn signals without removing the brake lines? And also, if I dont use a relay for the aftermarket signals, will it hurt my bike?
  9. 3

    Updating Headlight & Turn Signals

    Hi.I'm new to the Vmax and want to get a more modern looking headlight and turn signals for my 2004.I'd like LED and hopefully something that performs better then stock.I have done wiring before but I would like to get something that is fairly easy to install.What is everyone using? Great...
    • 396375
    • Thread
    • headlight signals turn updating
    • Replies: 9
    • Forum: Electrical
  10. A

    How to mount turn signals on front of vmax

    Hello im from portugal, and my uncle have vmax 1200 1998 full power and don´t have the suport bar stock in front where the turn lights signals is mout. how can i mout the led turn signals in front of the bike ? i have this bike 1 week ago it has 13 mil kms...
  11. effingidiot

    turn over problem.

    My 1994 vmax is back together now,i put everything in a new frame.I conected the battery,turned on the ignition i thought great i got lights.I pressed the start button i just wanted to see if it turned over,the bike turned over but not a full rotation then stopped.Now when i press the starter...
  12. T

    LED turn signal help please

    Hello chaps Further to this thread http://www.vmaxforum.net/showthread.php?t=43505 I'v fitted similar (single colour) blinkers to the rear of my max. the problem i'v got is all four blinkers are now flashing simultaneously, like hazard warning lights If i re-fit the stock blinkers to...
  13. Foxviewnet

    Turn Signals Intermittent

    I noticed last night that my right front and rear left turn signals and running lights are intermittent. While riding, the running lights on these signals go in and out. The turn signals also do not work when they are off . They may stay on for a while while riding but I notice they tend to go...
  14. D

    Front left turn signals wont work

    My front left turn signals won't work on my '96 (one mounted on fork, one in the mirror). I just got this bike and I'm not familiar with the max's wiring; where should I start in diagnosing this? Everything looks hooked up too.
    • Dashiznit1
    • Thread
    • blinkers diagnosing front left signals turn turn signals wiring work
    • Replies: 5
    • Forum: Electrical
  15. Poolio

    Aftermarket turn signals non led

    I bought a set of jap crap lights that look cool. Back went on no problems. Front only has two wires. Have everything working but no running lights now. How can I get them to work? That extra wire I'm left with for each side because I only used two, can it be spliced into somewhere?
    • Poolio
    • Thread
    • aftermarket led signals turn
    • Replies: 1
    • Forum: Electrical
  16. Q

    Turn Signal replacement Help?

    I just replaced my OEM turn signals on my 2014 Gen II. I bought two wire LED lights, but planned not to use the running lights up front. I also bought the proper flasher module. So far so good. Here is the issue: If I hook the front turn signals to the flashing signal wires, the front and...
  17. ga_max

    Where Did I got Wrong ,Turn Signal Replacement)

    Feeling the mod monkey on my back but having very little $ at my disposal I thought I'd replace the lollipop turn signals with smaller ones. I wanted to stick with incandescent lights to avoid the LED issues. Found some on ebay the other in the forum used (dual filament, 3 wire) and got them...
    • ga_max
    • Thread
    • replacement signal turn wrong
    • Replies: 9
    • Forum: Electrical
  18. 2

    1996 Vmax turn signal relay

    Looks like my turn signal relay is gone. I am trying to wire it a Harlan shift light to the rear of the tach and there's no power to the brown wire. The gray is the tach impulse wire and the black is the ground. Does anyone know if the tach power is routed through the turn signal relay...
    • 2F792
    • Thread
    • 1996 relay signal turn vmax
    • Replies: 2
    • Forum: Electrical
  19. T

    Front left turn signal

    I bought two new signals for the front, one has three wires and works great. The other only has two wires and not flashing. My question is do I have to buy a new one or is there a way to make this one work? The bulb has only one filament too!
  20. Johnc1go

    New Turn Signal Mods

    I wanted the UFO Radiance front signals, but I think I like this better. I got the idea from a member over at starvmax. I got the integrated tail late from a rider friend nearby.
Top