carb cover screw

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

BIGMO

Well-Known Member
Supporting Member
Joined
Dec 15, 2006
Messages
315
Reaction score
0
Location
Missouri
What is a good replacement screw for the side cover on the carbs/ the cover that is over the Vboost. Mine are chromed. They have a large phillips head on them. In my infinent wisdom i left mine in with the covers off to make a few test runs. Of course one vibrated out. any ideas?
 
They are rally cheap to replace with new from U/motors. Mine were rusty inside.New ones were $6 for the 4.The new ones also seem to be a cheap form of stainless.
 
I just went to Lowe's and grabbed some allen head screws. Only a couple bucks for all 16.
 
If your meaning the ones that cover the diaphrams, 4 per carb, I went to a place called fastenall where they orded me in some stainless steel button head allens. It was like $5.50 out the door. They look even better then factory since they match many of the larger ones nearby on various parts of the motor.
 
Back
Top