D djvmax07 Well-Known Member Joined Jun 9, 2013 Messages 119 Reaction score 0 Location indiana Mar 22, 2014 #1 have morleys kit installed and carbs jetted. what do i need to do to the a/f screws if anything? do i sync the carbs before or after messing with the a/f screws...
have morleys kit installed and carbs jetted. what do i need to do to the a/f screws if anything? do i sync the carbs before or after messing with the a/f screws...
Traumahawk Well-Known Member Joined Dec 12, 2011 Messages 8,164 Reaction score 417 Location Lawton, OK Mar 22, 2014 #2 Most people start with 2 1/2 turns out. Syncing should be like the last thing to do.
D djvmax07 Well-Known Member Joined Jun 9, 2013 Messages 119 Reaction score 0 Location indiana Mar 22, 2014 #3 from There current settings?
Traumahawk Well-Known Member Joined Dec 12, 2011 Messages 8,164 Reaction score 417 Location Lawton, OK Mar 22, 2014 #4 You turn the A/f screws all of the way in (all the way to the right), and then back them out 2 1/2 turns (to the left)
You turn the A/f screws all of the way in (all the way to the right), and then back them out 2 1/2 turns (to the left)
D djvmax07 Well-Known Member Joined Jun 9, 2013 Messages 119 Reaction score 0 Location indiana Mar 22, 2014 #5 thank you sir
Traumahawk Well-Known Member Joined Dec 12, 2011 Messages 8,164 Reaction score 417 Location Lawton, OK Mar 22, 2014 #6 Your very welcome....There is a LOT of very good information on this forum.