Float Height

[1FK00]

Does anybody on the board know what the spec fuel height translates into float height?

 

[shawn kloker]

17mm

 

[1FK00]

Measured from where to where? The top most edge of the float, farthest from the pivot, to the carb body?

I have played around with float heights over the years and like an imbecile have misplaced my records of where they were originally set. I know I can go through the tedious fuel level procedure with the clear tubing and such but was hoping to get float height numbers for the correct fuel height.

 

[maleko89]

If you have the float bowls off, turn carbs upside down. Measure from the bottome of the float to the bottom or inner carb body. Should measure about 1.07 inches.

 

[1FK00]

Thanks!