Ignition fuse blows when key is turned to the on position

[Chasej94]

Hey everyone
When I was riding home, randomly my bike quit and I come to find out my ignition fuse blew. I had a spare, put it in, turned the key and it blew again. Any ideas on where to look? And just for reference I have a ingitech box from Sean.

 

[MaxMidnight]

Stating the bleedin' obvious you have a short on the ignition circuit. Most likely cause is chaffing of the loom somewhere.
No easy answer to this one. Does it make any difference if the handlebars are turned one way or the other?
Is so I'd inspect the look around the head stock.
Failing that do a visual inspection of the loom and look for potential chaffing points and damaged sheathing.
If still no go then you will need to get out the multimeter earth the black probe and start checking each wire to see which one is shorting.

 

[CaptainKyle]

Unplug your voltage regulator and see if it still does it.

 

[Chasej94]

I’ll check both of those things, hopefully it’s something easy to find

 

[Chasej94]

Ended up being the new ignitech box….go figure. Plugged in my old box and it started right up without blowing a fuse

 

[Coastal Grey]

Ended up being the new ignitech box….go figure. Plugged in my old box and it started right up without blowing a fuse

You never mentioned that

 

[Coastal Grey]

You never mentioned that

My apologies you did