Ignition fuse blows when key is turned to the on position

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Chasej94

Member
Joined
Oct 9, 2019
Messages
13
Reaction score
1
Location
West Jordan, Utah
Hey everyone
When I was riding home, randomly my bike quit and I come to find out my ignition fuse blew. I had a spare, put it in, turned the key and it blew again. Any ideas on where to look? And just for reference I have a ingitech box from Sean.
 
Last edited:
Stating the bleedin' obvious you have a short on the ignition circuit. Most likely cause is chaffing of the loom somewhere.
No easy answer to this one. Does it make any difference if the handlebars are turned one way or the other?
Is so I'd inspect the look around the head stock.
Failing that do a visual inspection of the loom and look for potential chaffing points and damaged sheathing.
If still no go then you will need to get out the multimeter earth the black probe and start checking each wire to see which one is shorting.
 

Latest posts

Back
Top