leaky carb?

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dmioton

Well-Known Member
Joined
Apr 4, 2011
Messages
77
Reaction score
2
Location
new york
Hi Guys,

Since my bike was knocked over a few weeks ago, I've noticed gas coming out of one of the rubber tubes coming from a carb. It's only happening on one, and it's very little that I see. It is always wet though, so when I'm riding, it could be coming out more.

I saw that there is a drain screw that allows gas to drain from the carb. Before I start tightening things, I wanted get some advice. I haven't adjusted anything at all, but guess that the impact of the fall may have affected it.

Any ideas?

Don
 
Try loosening and then tightening the drain screw. If it still leaks then replace the o-ring on the screw.
 
Try loosening and then tightening the drain screw. If it still leaks then replace the o-ring on the screw.

If you need to replace the o-ring here's the correct part number....

Mfg. Part Number: 214-14147-00-00

Be sure to use this number, it is from the '07 fiche, there is a misprint on earlier model parts fiche. Morley sells OEM and is aware of this issue.
 
Back
Top