New Member
- Thread starter salty77
- Start date
Help Support VMAX Forum:
Welcome to the forum. Here's a copy of the service manual: http://vmoa.net/VMX12-Service-Manual01.pdf
And answers to many of the questions you may have: New Vmax Owner FAQs....new members please read!
Use the 'search' or 'advanced search' in the upper-right to research topics of interest to you.
And answers to many of the questions you may have: New Vmax Owner FAQs....new members please read!
Use the 'search' or 'advanced search' in the upper-right to research topics of interest to you.
Welcome
Thanks for the links, I have learned quite a few new things already.
Remember when you do some repairs on your bike, you can write up anything and post it, with pics, and it likely will help someone else with that situation.
Hi, welcome
JOHN.DONALDSON
New Member
- Joined
- Aug 16, 2022
- Messages
- 2
- Reaction score
- 0
Im new here. I had a used 96 vmax years ago but got behind on mortgage so sold it.. now i Just got a used 2006 vmax. Got to get a tune up. Cylinders 3 and 4 ( the right side) carb issues. Seems to run on 2 or3 cylinders. Tried cleaning but no improvements.
What did that involve?
My own experience is that if the bike is left standing for any length of time (say 4+ months, then it's carbs off, key block off, pilot jets out and ensure the hole through them is clear.
JOHN.DONALDSON
New Member
- Joined
- Aug 16, 2022
- Messages
- 2
- Reaction score
- 0
Yep, i took them off and cleaned what was obvious to me and checked some of the ports but I don’t know enough to go further. Decided to use a professional with a garantee. Rather ride than wrench these days.
How has that turned out for you?
