Strange clunk when engaging the clutch

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
What about (no this is not a political statement!) the rubber snubbers in the wheel?
 
I won't be able to get to it again until the weekend. Rubber snubbers... those are the rubber dampeners inside the rear wheel right.
 
Since I’ve been losing sleep over this, didn’t go to work today and decided to tear into the bike. Incoming photo video dump.

From what I can tell, everything looks pretty good. I didn’t separate the shaft from the pumpkin… yet

 

Attachments

  • IMG_2254.jpeg
    IMG_2254.jpeg
    2.9 MB · Views: 0
  • IMG_2255.jpeg
    IMG_2255.jpeg
    1.8 MB · Views: 0
  • IMG_2256.jpeg
    IMG_2256.jpeg
    2.1 MB · Views: 0
  • IMG_2259.jpeg
    IMG_2259.jpeg
    1.2 MB · Views: 0
  • IMG_2263.jpeg
    IMG_2263.jpeg
    2.6 MB · Views: 0
 

Attachments

  • IMG_2262.jpeg
    IMG_2262.jpeg
    2.9 MB · Views: 0
  • IMG_2264.jpeg
    IMG_2264.jpeg
    2.2 MB · Views: 0
Here’s mine was very noisy even in neutral but it was that way for 10000miles, Sean Morley hooked me up with a very nice replacement final drive

CE921978-BC2F-444D-8231-A09FB7586DC7.jpeg80965475-6AB8-4A5F-B1D6-AEC6F84231C4.jpeg
 
Last edited by a moderator:
Looks good to me
 

Attachments

  • IMG_2277.jpeg
    IMG_2277.jpeg
    1.3 MB · Views: 0
  • IMG_2276.jpeg
    IMG_2276.jpeg
    1.2 MB · Views: 0
  • IMG_2274.jpeg
    IMG_2274.jpeg
    1.4 MB · Views: 0
Back
Top