I think this is what I need...

[Daver]

Hi guys,

Ive been searching and going through previous threads and I think I have it sorted. I bought a set of used ss supertrapp slip ons without discs, hardware or end caps. Could someone please tell me if this kit has everything I need to get rolling?
http://www.amazon.com/Supertrapp-4in-Tuneable-Shield-402-3046/dp/B000WKEQ62/ref=pd_sim_sbs_auto_4

Thanks very much guys
Dave

 

[mr.maxx]

all yer getting is the endcap....that photo is deceptive.

 

[KJShover]

That ad looks like it's just one endcap and no discs. Endcaps are pretty cheap at Summit, you can also get the discs without breaking the bank (under $30 for 12 of them). I ran them on my bike a few years back. I liked them cause they gave the pipes a "finished" look for just $40 for a pair.

 

[Daver]

I'm still exploring my options here, but I'm leading toward the 'open' end cap and no disks. I've found what I think are two options for end caps. One is a three inch and one four. 3" apparently has a flow roughly equal to 6-8 discs. That sounds perfect. Can I attach these with regular metric bolts? Or are they in some way unique? Does anyone have a part number for these? Tough to order this stuff in Canada
Thanks
Dave

 

[mr.maxx]

get stainless steel if you can...and make shure to put anti sieze on the threads.....if they ever get frozen in there yull have a mess like i do....:damn angry:

places like home depot or lowes should have em.....hardware shops perhaps

 

[DMAN999]

Part Numbers are listed here:
http://www.supertrapp.com/product_sections/cat.asp?CatID=69

Aluminum 4" Open End Cap (you need 2): (Vmax Supertrapp Slipons are 4" not 3")
http://www.amazon.com/Supertrapp-402-3046-Aluminum-Shield-Logo/dp/B001CM0HLM/ref=pd_sim_sbs_auto_4
OR StainlessSteel Open End Cap:
OPEN END CAP 4'', OFF-ROAD USE ONLY SS - Part# - 405-3046
http://www.amazon.com/Supertrapp-405-3046-Polished-Stainless-Steel/dp/B0006HNS6K
These Open Caps are equal to 10-12 Discs.

And these are the Bolts (again you need 2 of these packs):
BOLT 6-PACK, 4", SS: 1-20 DISCS - Part# 404-7206
http://www.amazon.com/SUPERTRAPP-SS-BOLTS-6-PAK-404-7206/dp/B000N46WR8

 

[m-cman]

I'm still exploring my options here, but I'm leading toward the 'open' end cap and no disks. I've found what I think are two options for end caps. One is a three inch and one four. 3" apparently has a flow roughly equal to 6-8 discs. That sounds perfect. Can I attach these with regular metric bolts? Or are they in some way unique? Does anyone have a part number for these? Tough to order this stuff in Canada
Thanks
Dave

Think the 3" and 4" are for different mufflers. The 4" fit the V-Max slip-ons. Been a while but pretty sure the 3" won't fit the Max mufflers.

 

[customizedcreationz]

Just run'em without the end caps

 

[KJShover]

One is a three inch and one four.

They even have a 5", but unfortunately they're different pipes. Its the outlet side of the pipes "bell" end. Like has been mentioned the Vmax trapps, are 4"