No power to front right coil/wire?!?!

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

SoundOfConception

New Member
Joined
May 7, 2012
Messages
2
Reaction score
0
Location
Port Moody
Can anyone help me to diagnose the cause for no power going to my lead/COP for the front right cylinder? The coil died, and when I switched leads and coils in its place, there was still no spark/power going to that cylinder. Could this be a CDI issue? Wire harness issue? I'm at a loss...
 
All coils are fed on the positive side by an ignition fuse wire. The CDI grounds the coil to make the spark at the plug. Check for 12+ volts at the coil plug connection first. I pm'd ya. Sean Morley has an excellant diagram on his site.
Steve-o
 
Last edited:
Back
Top